Chrysler Conquest 1988 Service Manual page 978

24-102
AIR CONDITIONING - Compressor
/
Clutch rotor
Y2071
- SERVICE POINT OF DISASSEMBLY
N24TFAE
5. REMOVAL OF ROTOR ASSEMBLY
It may be necessary to lightly tap the rotor with a plastic ~1
hammer.
INSPECTION
N24TGAE
* Check the surface of the clutch hub for scoring or bluing.
@ Check the surtace of the_ rotor tor scoring or b;ruing.
l
Check the sealing surtaces for cracks, -scratches and 1:
deformation.
B Check the front houslng tor cracks or scoring on the sealing .i
surfaces. z
@ Check the compressor shaft tor scoring.
.I
'i,, Front housing
I
SERVICE POINTS OF REASSEMBLY
N24THAE
14. INSTALLATION OF SEAL PLATE
/
: I'/
I -1
Lubricate the_s_e_aI plate and a pew O-ring with compressor
-*;-
,! l-b!3 \k>.
'.--i-c.-.
oil. Push the seal plate arrd O-ring into the front housing.
Seal plate
2OY789
.-
5
19 mm deep socket
ZO'i7C
Install the seal plate into the front housrng with a 19 mm -
deep well socket.
-
(3
Shaft
- 13. INSTALLATION OF SHAFT SEAL
-
s
seal
Lubricate the shaft seal with compressor oil. Install the
!?I
shaft seal on the shaft.-
.~
NOTE
Rotate the shafl seal iighfly by hand to check that it is fitted:,
into the notch on the compressor shaft.
2OY788