Chrysler Conquest 1988 Service Manual page 778

3uter bearing
FRONT SUSPENSION
- Front Axle Hub
(3) Press-fit the bearing outer races with the spectal tools.
Inner bearing
(4) Properly pack the bearing with specified grease and install _
into hub.
n
,c-4171
, L-4446
dfL
+
;,
F125i.
Specified grease: MOPAR Multi-mileage Lubricant Part
No. 2525035 or equivalent
NOTE
The bearing and outer race must be replaced as an ~1~
assembly.
SERVICE POINT OF REASSEMBLY
NOZHEAE
6. INSTALLATION OF OIL SEAL
(I) Apply the specified grease to the oil seal lip and insrde
surface of_ the front axle hub.
Specified grease: MOPAR Multi-mileage Lubricant
Part No. 2525035 or equivalent
(2) Apply the specified grease to the inner- bearim int--er _
race and install the inner race into the
front
axle hub. _p
Specified grease: MOPAR Multi-mileage Lubricant
Part No. 2525035 or equivalent
(3) Press-fit the new oil seal Into the front axle hub-by usrng
the special tools, unttl It IS Hush with the tront.axle hub .-.I
end face.