Chrysler Conquest 1988 Service Manual page 467

WIPER AND WASHER SYSTEM
- Rear Wiper
8-217
NOSKKAB
REAR WIPER
REMOVAL AND INSTALLATION
6-9 iI
4-7
ft.lbs.
Removal steps
1. Wiperblade
2. Head cover
+* 3. Wiper arm
4. Shield cap
5. Collar
6. Tailgate trim
7. Harness clip
8. Wiper motor connector
9. Wiper motor
FEeverse the removal procedures to reinstall.
(2)
l
4: Refer to "Service Points of Installation".
I
18Y1750
I
I
SERVICE POINT OF INSTALLATION
3.
INSTALLATION OF WIPER ARM
Mount the wiper arm on the pivot shaft so that the stopping
Dosition of the wiper blade is in agreement with the
standard value.
Standard value (distance between blade tip and tail-
gate garnish): 45 - 55 mm (1.8 - 2.2 in.)