Chrysler Conquest 1988 Service Manual page 1045

REAR AXLE
- Drive Shaft
3-27
Cage
D.O.J.
inner race
(4) Apply specified grease to the D.O.J. inner race and the
D.O.J. cage, and then fit them together.
Specified grease: Repair kit grease
4. APPLICATION OF GREACE TO BALLS
Apply specified grease to the ball insertion parts of the
D.O.J. inner race and D.O.J. cage, and insert the balls.
Specified grease: Repair kit grease
3. INSTALLATION OF D.O.J. OUTER RACE
(1) Apply 65 to 75 g (2.3 to 2.6 oz) of specified grease to the
D.O.J. outer race.
(2) Fit the drive shaft into the D.O.J. outer race.
(3) Apply 45 to 55 g (1.6 to 1.9 oz) of specified grease to the
D.O.J. outer race.
Specified grease: Repair kit grease
Overall capacity
IIO- 130 g (3.9-4.5 oz)
Within D.O.J. 65 - 75 g (2.3 - 2.6 oz)
Within D.O.J. boot 45-55g(1.6-1.9oz)
1. INSTALLATION OF BOOT BANDS (FOR D.O.J. BOOT)
(1) Install the circlip onto the D.O.J. outer race.
(2) Place the D.O.J. boot over the D.O.J. outer race, and
then use boot band (1) to secure the boot.
(3) Place boot band (2) at the specified distance in order to
adjust the amount of air inside the D.O.J. boot, and then
tighten the boot band (2).
Standard value (A): 83 f 3 mm (3.3 +_ .I2 in.)