Chrysler Conquest 1988 Service Manual page 1201

AUTOMATIC TRANSMISSION
- Transmission Control
21-79
09Y637
(in.)
09Y116
mm
-17
-.62)
Selector lever 1 Transmission
Y09612 1
SERVICE POINT OF INSTALLATION
NZlIDAK
11. INSTALLATION OF SELECTOR LEVER
(1) Apply a thin coat of specified multipurpose grease to
the sliding parts.
Specified grease: MOPAR Multi-Mileage Lubricant
Part No. 2525035 or equivalent
(2) Place the shift lever in the "N" position, and then turn
the sleeve so that the clearance between the sleeve
and the lever assembly end is within the specified
range.
NOTE
Be sure to face A of the adjusting cam to the
pushbutton (driver's side).
(3) Connect the control rod to the transmission side lever
and the cross-shaft assembly lever. With the selector
lever set to "N" position and the transmission side lever
to its neutral position, connect and lock the lever to
cross-shaft.