Chrysler Conquest 1988 Service Manual page 539

ETACS - Theft-alarm System
8-289
COMPONENT PARTS AND FUNCTION
SECURITY Light
Located at the combination meter.
The SECURITY light illuminates when the alarm system is set to arm;
the illumination stops after about 20 seconds, thus informing the
driver that the system is now armed.
The illumination ON/OFF of this light are controlled by the ECU
(transistor Trl), and power is supplied, through fuse No.1,
from the battery.
tch is ON, and a ground signal is sent
nai is input to the ECU when the system is in the armed
ron, the ECU functions to activate the alarm.
partment. .
or Tr2) when the system
the theft-alarm horn begins to sound.
y is supplied, through the fuse No.1, from the
Located at the left front of the dash panel.
When the system is in its activated state, this relay is act.ivated