Chrysler Conquest 1988 Service Manual page 788

FRONT SUSPENSION - Lower Arm and Knuckle Arm
BALL JOINT DUST COVER REPLACEMENT
NOZNEAC
(1) Remove the dust cover. ~
13Ytw7
Grease
Cap
12Y72>
Y12564
Mb90799
Y12565
(2) Apply semi-drying sealant to the metal ring part of the new
dust cover.
(3) Drive in the dust cover with the special tooiuntil i;t is fully
seated.
(4) Exchange the ball joint plug with a grease nipple.
(5) Shape the dust cover to dimensions shown and pack with
specified grease until it takes the form as- indicated by
broken line. -1L
Specified grease: MOPAR Multi-mileage Lubricant Part
No. 2525035 or
equivalent
(6) Apply semi-drying sealant to plug and reinstall plug.
LOWER ARM BUSHING REPLACEMENT
Caution
NOZNDAB
Do not remove the lower arm bushing unless absolutely
necessary.
(1) Press out the lower arm bushing with the special tool.
(2) Press-fit the neti~lower arm bushing with the special tool
until it is fully seated in the lower arm.