Chrysler Conquest 1988 Service Manual page 1079

REAR SUSPENSIONS
- Stabilizer Bar
STABILIZER BAR
REMOVAL AND INSTALLATION
1741
N17lA. -
IO-20 Nm
7-14 ft.lbs.
3040 Nm
22-Y - IL -
/
Removal steps
1. Bracket
2. Stabilizer bar mounting self lock nut
3. Center exhaust pipe rubber
O-ring
4. Joint cup
5. Rubber
bushing
++ 6. Stabilizer bar
7. Rubber bushing
8. Joint cup
9. Collar
10. Joint cup
11. Rubber bushing
12. Joint cup
13. Rubber bushing
14. Joint cup
15. Bushing
NOTE
(1) Reverse the removal procedures to reinstall.
('2) *a: Refer to "Service Points of Installation"
(3) m: Non-reusable parts
12Y712
INSPECTION
Nl7lBAA
l
Check the stabilizer bar for deformation and weakness.
l
Check the bushings for cracks and damage.
SERVICE POINT OF INSTALLATION
N171CAA
6. INSTALLATION OF STABILIZER BAR
When installing the stabilizer bar to the lower control arms,
tighten the nut so as to obtain the service standard.
Service standard: 15 - 17 mm ('59 - .67 in.)