Chrysler Conquest 1988 Service Manual page 1111

STEERING
- Power Steering Gear Box
19-25
19. REMOVAL OF TOP COVER
Remove the top cover by using the special tool, and take
out the mainshaft, together with the top cover, from the
valve housing.
21. REMOVAL OF BALL BEARING / 22. OIL SEAL
Remove the ball bearing and the oil seal with a punch.
Spacer
13Y93C
INSPECTION
NISNGAB
l
Check the mainshaft for wear and damage.
l
Check the cross-shaft and rack piston for wear and damage
of tooth surface.
l
Check the adjusting bolt for uneven wear of contact part.
l
Check the dust seal and oil seal for wear and damage.
l
Check the O-rings for damage.
-