Chrysler Conquest 1988 Service Manual page 1070

17-2
REAR SUSPENSION - General Information
GENERAL INFORMATION
N17BAAG
The rear suspension is a simply constructed McPherson Strut type independent suspension system with light
unsprung weight.
The strut assembly is mounted, with its upper end supported by the wheel house through the Insulator and its =
lower end connected to the axle housing.
The lower control arms are connected to the front support, crossmember and axle housrng through bushings.
A cam mechanism is provided between each lower control arm and the crossmember for toe-in adjustment. ~_
The stabilizer-bars with their front ends bolted to the front support at two points, are connected to the
respective lower control arms.
The front support holds the torque tube and the lower control arms through upper and lower cushions and ~.
bushings, respectively. The both ends of the front support are bolted to the body with the mediate use of
bushings.
Stabilizer bar
Axle housing
Lower control an-n