Chrysler Conquest 1988 Service Manual page 1210

21-88
AUTOMATIC TRANSMISSION
- Automatic Transmission Assembly
~.~
e- _
Flexible type
band brake
mm (in.)
Approxlrnately
2 t.08)
dia. Wire Chp JATOS;
I
JATOGO
19. Remove brake -band strut, Brake band and clutch and _
planetary gear pack [including high-reverse ~clutch (Front),
forward clutch (Rear) and front planetary gear]. may be =
removed together.
20. To prevent brake linings-from cracking or peeling, do not
stretch the .fle>tible band unnecessarily. Before removing -1
the brake band, always secure it with a clip as shown in the mP
illustration.
Leave the clip in position- after removing the brake band. -I
21.
Remove 2nd band servo retarnrng
remove 2nd band servo.
bolts. Apply pressure
-
22. Check onezway clutch to see it It operates properly.
23. Remove re$r planetary carrier snap ring and rear planetary
carrier.