Chrysler GRAND CARAVAN 2023 Owner's Manual
  1. Manuals
  2. Brands
  3. Chrysler Manuals
  4. Automobile
  5. GRAND CARAVAN 2023
  6. Owner's manual

Chrysler GRAND CARAVAN 2023 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
2023
GRAND CARAVAN
O W N E R ' S M A N U A L

Advertisement

Table of Contents
loading

Related Manuals for Chrysler GRAND CARAVAN 2023

Summary of Contents for Chrysler GRAND CARAVAN 2023

  • Page 1 2023 GRAND CARAVAN O W N E R ’ S M A N U A L...
  • Page 2 Uconnect manuals and Warranty Booklet can be found by visiting the website on the back cover. ROADSIDE ASSISTANCE 24 HOURS, 7 DAYS A WEEK AT YOUR SERVICE. CALL 1-800-521-2779 OR VISIT CHRYSLER.RSAHELP.COM (USA) CALL 1-800-363-4869 OR VISIT FCA.ROADSIDEAID.COM (CANADA) SERVICES: Flat Tire Service, Out Of Gas/Fuel Delivery, Battery Jump Assistance, Lockout Service and Towing Service Please see the Customer Assistance chapter in this Owner’s Manual for further information.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS INTRODUCTION ..........................6 GETTING TO KNOW YOUR VEHICLE ................. 10 GETTING TO KNOW YOUR INSTRUMENT PANEL ............59 STARTING AND OPERATING ....................75 MULTIMEDIA ..........................105 SAFETY ............................126 IN CASE OF EMERGENCY ..................... 176 SERVICING AND MAINTENANCE ..................198 TECHNICAL SPECIFICATIONS ....................243 CUSTOMER ASSISTANCE .....................248 INDEX .............................
  • Page 4 INTRODUCTION Manual Sliding Side Door..........20 EXTERIOR LIGHTS .............. 38 Power Sliding Side Door —If Equipped .......20 Multifunction Lever ............. 38 SYMBOLS KEY ............... 7 Child Protection Door Lock System — Rear Doors..21 Headlight Switch............39 VEHICLE MODIFICATIONS/ALTERATIONS ......7 Daytime Running Lights (DRLs) —If Equipped... 39 STEERING WHEEL ..............
  • Page 5 HOOD..................56 ONBOARD DIAGNOSTIC SYSTEM — OBD II ..... 73 STOP/START SYSTEM — IF EQUIPPED ......85 Opening................ 56 Onboard Diagnostic System Autostop Mode ............85 Closing ................. 56 (OBD II) Cybersecurity..........73 Possible Reasons The Engine Does Not Autostop..85 LIFTGATE ................56 EMISSIONS INSPECTION AND MAINTENANCE To Start The Engine While In Auto Stop/Start ...
  • Page 6 RECREATIONAL TOWING (BEHIND MOTORHOME) ..102 SAFETY TIPS ..............173 MANUAL PARK RELEASE ..........194 Towing This Vehicle Behind Another Vehicle ..102 Transporting Passengers ......... 173 FREEING A STUCK VEHICLE ...........195 DRIVING TIPS ..............103 Transporting Pets ............ 173 TOWING A DISABLED VEHICLE........196 Driving On Slippery Surfaces........
  • Page 7 TECHNICAL SPECIFICATIONS CUSTOMER ASSISTANCE TIRES ................224 Tire Safety Information ..........224 VEHICLE IDENTIFICATION NUMBER (VIN)..... 243 SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR Tires — General Information ........232 BRAKE SYSTEM .............. 243 VEHICLE ................248 Tire Types..............235 WHEEL AND TIRE TORQUE SPECIFICATIONS ....243 Prepare For The Appointment ........248 Spare Tires —...

  • Page 8: Introduction

    FCA US LLC aims at a constant improvement of the vehicles produced. For this reason, it reserves the right to make changes to the model described for technical and/or commercial reasons. For further information, contact an authorized dealer. When it comes to service, remember that authorized dealers know your Chrysler vehicle best, have factory-trained technicians and genuine Mopar® parts, and care about your satisfaction.

  • Page 9: Symbols Key

    SYMBOLS KEY SYMBOL GLOSSARY These statements apply to operating procedures that Some car components have colored labels with symbols indicating precautions to be WARNING! observed when using this component. It is important to follow all warnings when operating could result in a collision, bodily injury and/or death. your vehicle.
  • Page 10 Yellow Warning Lights Red Warning Lights Anti-Lock Brake System (ABS) Warning Light Engine Coolant Temperature Warning Light page 70 page 69 Ú Ú Electric Park Brake Warning Light Hood Open Warning Light page 70 page 69 Ú Ú Electronic Stability Control (ESC) Active Warning Light Liftgate Open Warning Light page 69 page 70...
  • Page 11 Yellow Warning Lights Green Indicator Lights Service Stop/Start System Warning Light Parking/Headlights On Indicator Light Ú page 71 Ú page 72 Tire Pressure Monitoring System (TPMS) Warning Light Stop/Start Active Indicator Light page 71 page 73 Ú Ú Turn Signal Indicator Lights Yellow Indicator Lights Ú...

  • Page 12: Getting To Know Your Vehicle

    GETTING TO KNOW YOUR VEHICLE KEYS  The key fob LED light brightness is designed for indoor 5 — Emergency Key light viewing, so the LED light may not be visible in 6 — Lock direct sunlight page 252. Ú 7 —...
  • Page 13 GETTING TO KNOW YOUR VEHICLE Key Left Vehicle Feature  Perchlorate Material — special handling may apply. See pocket until it is firmly seated in place and secured www.dtsc.ca.gov/hazardouswaste/perchlorate for under both tabs. If a valid key fob is no longer detected inside the vehicle further information.

  • Page 14: Sentry Key

    GETTING TO KNOW YOUR VEHICLE IGNITION SWITCH After placing the ignition in the ON/RUN position, the WARNING! Vehicle Security Light will turn on for three seconds for a bulb check. If the light remains on after the bulb check, it ‘...

  • Page 15: Remote Start - If Equipped

    GETTING TO KNOW YOUR VEHICLE The push button ignition can be placed in the following CAUTION! modes: An unlocked car is an invitation. Always remove the key fobs from the vehicle and lock all doors when leaving  The engine is stopped the vehicle unattended.

  • Page 16: How To Use Remote Start

    GETTING TO KNOW YOUR VEHICLE  For security, power window operations are disabled EMOTE TART WARNING! when the vehicle is in the Remote Start mode. To drive the vehicle after starting the Remote Start  The ignition must be placed in the ON/RUN position ...

  • Page 17: Remote Start Front Defrost Activation - If Equipped

    GETTING TO KNOW YOUR VEHICLE Manual Temperature Control (MTC) — If Equipped EMOTE TART RONT EFROST EMOTE TART ANCEL ESSAGE  In ambient temperatures of 40°F (4.5°C) or below, the — I CTIVATION QUIPPED The following messages will display in the instrument climate settings will default to maximum heat, with cluster if the vehicle fails to remote start or exits Remote fresh air entering the cabin.

  • Page 18: To Arm The System

    GETTING TO KNOW YOUR VEHICLE NOTE: YSTEM ECURITY YSTEM ANUAL VERRIDE  The driver's door key cylinder and the liftgate button on Follow these steps to arm the Vehicle Security system: The Vehicle Security system will not arm if you lock the the key fob cannot arm or disarm the Vehicle Security doors using the manual door lock.

  • Page 19: Power Door Locks - If Equipped

    GETTING TO KNOW YOUR VEHICLE — I OWER OCKS QUIPPED WARNING! A power door lock switch is on each front door trim panel.  For personal security and safety in the event of a Use this switch to lock or unlock the doors. collision, lock the vehicle doors before you drive as well as when you park and leave the vehicle.

  • Page 20: Keyless Enter 'N Go™ - Passive Entry

    GETTING TO KNOW YOUR VEHICLE ‘ ™ — P  The sliding side doors can be unlocked from the Frequency Operated Button Integrated Key (FOBIK-Safe) EYLESS NTER ASSIVE outside using the Passive Entry system. To minimize the possibility of unintentionally locking a key NTRY To Unlock From The Driver Or Passenger Side: fob inside your vehicle, the Passive Entry system is...

  • Page 21: Automatic Unlock Doors On Exit - If Equipped

    GETTING TO KNOW YOUR VEHICLE NOTE: On the third attempt ALL doors will lock and the key fob can be locked in the vehicle. To Lock The Vehicle’s Doors And Liftgate With one of the vehicle’s key fobs within 5 ft (1.5 m) of the driver or passenger front door handle, push the door handle lock button to lock all four doors and the liftgate.

  • Page 22: Manual Sliding Side Door

    GETTING TO KNOW YOUR VEHICLE sliding door open on any incline. To close the sliding ANUAL LIDING door after the hold-open latch is activated, you must The sliding door may be opened from the inside or the rock the inside handle forward or pull outward on the outside.

  • Page 23: Child Protection Door Lock System - Rear Doors

    GETTING TO KNOW YOUR VEHICLE NOTE:  After disengaging the Child Protection Door Lock, HILD ROTECTION always test the inside door handle with the sliding door — R  If anything obstructs the power sliding side door while YSTEM OORS closed to make certain the Child Protection Door Lock it is closing or opening, the door will automatically is in the unlocked position.

  • Page 24: Steering Wheel

    GETTING TO KNOW YOUR VEHICLE NOTE: NOTE: wheel outward or push it inward as desired. To lock the steering column in position, push the lever upward until After disengaging (or engaging) the Child Protection Door The engine must be running for the heated steering wheel fully engaged.

  • Page 25: Manual Adjustment (Front Seats) - If Equipped

    GETTING TO KNOW YOUR VEHICLE Manual Seat Height Adjustment — WARNING! If Equipped  Do not allow people to ride in any area of your vehicle The seat height can be raised or lowered by using a lever, that is not equipped with seats and seat belts. In a located on the outboard side of the seat.
  • Page 26 GETTING TO KNOW YOUR VEHICLE WARNING! WARNING! WARNING!  Adjusting a seat while driving may be dangerous. Do not ride with the seatback reclined so that the  Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. Moving a seat while driving could result in loss of shoulder belt is no longer resting against your chest.
  • Page 27 GETTING TO KNOW YOUR VEHICLE NOTE: WARNING!  The seatback may lock into the fold-flat position. Use If not properly latched, the seat could become loose. the recline lever to unlock the seatback. Personal injuries could result.  If equipped with Stow ‘n Go seating: when returning the seat to the original position, the headrest must be folded back to the original position.
  • Page 28 GETTING TO KNOW YOUR VEHICLE Slide the lever upwards, or if equipped, pull the Easy Entry — With The Seat Folded Flat handle forward, to unlock the seatback. The seats can be folded and tilted for more accessibility for passengers to enter and exit the third row. Without a child seat installed, you can fold the seat by pulling the recliner handle on the bottom part of the seat.
  • Page 29 GETTING TO KNOW YOUR VEHICLE Tilt the back of the seat to the upward position. Pull Strap For Third Row Passengers Fold-Flat Seat Recline Lever NOTE: NOTE: Tilt Seat Forward This process is for when there is no child seat installed. Push downward on the seatback to make sure it is in the The seat assembly can now be removed from the Use the easy entry lever if a child seat is installed.
  • Page 30 GETTING TO KNOW YOUR VEHICLE NOTE: Reinstalling Seat Push downward to ensure the rear latches are in the To reinstall the seat: With the seat tilted forward, locked position. align the seat’s front attachments into the detent positions on the floor. Lift the recline handle and return the seat back to the seating position.
  • Page 31 GETTING TO KNOW YOUR VEHICLE Stow 'n Go Seating Pulling strap “2” releases the seatback to return to its full upright position. On vehicles equipped with Stow 'n Go seating, the second and third row seats can be folded into the floor for convenient storage.
  • Page 32 GETTING TO KNOW YOUR VEHICLE NOTE: Push down on the seatback to lock the seat into the storage area.  Push the lock rod inward for the locked position.  Pull outward on the lock rod for the unlocked posi- tion.
  • Page 33 GETTING TO KNOW YOUR VEHICLE CAUTION!  Do not sit on the second row seat when it is in the stowed position with the seatback upright otherwise damage to the seat may occur. TO UNSTOW SECOND ROW SEATS To unstow the seat from the floor, move the front seat all the way forward using the manual seat adjustment bar.

  • Page 34: Power Adjustment (Front Seats) - If Equipped

    GETTING TO KNOW YOUR VEHICLE ) — NOTE: Lay the floor panel flat and push down until it clicks OWER DJUSTMENT RONT EATS into position. The seatback may be locked, if it is, it will be necessary to QUIPPED use the recliner handle to unlock the back before folding into the upright position.
  • Page 35 GETTING TO KNOW YOUR VEHICLE Tilting The Seat Up Or Down CAUTION! WARNING! The angle of the seat cushion can be adjusted in two Do not place any article under a power seat or impede  Seats should be adjusted before fastening the seat directions.

  • Page 36: Heated Seats

    GETTING TO KNOW YOUR VEHICLE EATED EATS WARNING! WARNING! Front Heated Seats — If Equipped  Persons who are unable to feel pain to the skin  Head restraints should never be adjusted while the because of advanced age, chronic illness, diabetes, vehicle is in motion.
  • Page 37 GETTING TO KNOW YOUR VEHICLE NOTE: If equipped with Stow ‘n Go seating, the head restraints are non-adjustable and non-removable. Do not pull on non-adjustable head restraints when folding the seat. To raise the head restraint, pull upward on the head restraint.

  • Page 38: Uconnect Voice Recognition

    GETTING TO KNOW YOUR VEHICLE NOTE: TARTED WARNING!  The head restraints must be raised manually when ALL the head restraints MUST be reinstalled in the VR button is used to activate/deactivate your occupying the third row. Voice Recognition system. vehicle to properly protect the occupants.

  • Page 39: Additional Information

    GETTING TO KNOW YOUR VEHICLE MIRRORS — LLUMINATED ANITY IRRORS QUIPPED NSIDE EARVIEW IRROR To access an illuminated vanity mirror, flip down one of the Manual Mirror visors and lift the cover. A single ball joint mirror is used to allow the driver to adjust up, down and left, right.

  • Page 40: Conversation Mirror

    GETTING TO KNOW YOUR VEHICLE ONVERSATION IRROR UTSIDE IRRORS OLDING EATURE Located in the overhead console there is a conversation All outside mirrors are hinged and may be moved either mirror to view all the passengers in the vehicle. Push the forward or rearward to resist damage.

  • Page 41: Headlight Switch

    GETTING TO KNOW YOUR VEHICLE NOTE: EADLIGHT WITCH For vehicles sold in Canada, rotate the headlight switch The headlight switch is located on the left side of the clockwise from the parking light and instrument panel instrument panel. The switch controls the operation of the light position to the first detent to turn on the headlights headlights, parking lights, instrument panel lights, and also.

  • Page 42: High/Low Beam Switch

    GETTING TO KNOW YOUR VEHICLE Turn Signal Warning If the headlights or parking lights are turned back on or the WITCH ignition is placed in the ON position, the delay will be If the vehicle electronics sense that the vehicle has Push the multifunction lever toward the instrument panel canceled.

  • Page 43: Interior Lights

    GETTING TO KNOW YOUR VEHICLE INTERIOR LIGHTS Rear Courtesy/Reading Lights — If Equipped NTERIOR OURTESY IGHTS Located above the rear passengers are courtesy/reading lights. The lights turn on when a front door, a sliding door The courtesy light switches are used to turn the courtesy or the liftgate is opened.

  • Page 44: Windshield Wiper And Washers

    GETTING TO KNOW YOUR VEHICLE At the top detent of the instrument panel dimmer, all the Intermittent Wipers interior lights will illuminate. At the bottom most setting Use the intermittent wiper when weather conditions make (extreme bottom) interior lights are turned off (dome off), a single wiping cycle with a variable pause between cycles and the cluster, radio and instrument lighting go to their desirable.

  • Page 45: Rain Sensing Wipers - If Equipped

    GETTING TO KNOW YOUR VEHICLE Mist  Use of products containing wax or silicone may reduce  Remote Start Mode Inhibit — On vehicles equipped with rain sensor performance. the Remote Start system, Rain Sensing wipers are not Push the lever upward to the MIST position and release for operational when the vehicle is in the Remote Start ...

  • Page 46: Climate Controls

    GETTING TO KNOW YOUR VEHICLE CLIMATE CONTROLS MAX A/C Button Recirculation Button Press and release the MAX A/C button to Press and release this button to change the ANUAL LIMATE ONTROL change the current setting. The indicator system between recirculation mode and illuminates when MAX A/C is on.
  • Page 47 GETTING TO KNOW YOUR VEHICLE Front Temperature Control Blower Control windshield and side window defrosting and defogging. Performing this function will cause the Automatic These buttons provide the driver and passenger with Blower Control is used to regulate the amount Temperature Control (ATC) to switch into manual mode.
  • Page 48 GETTING TO KNOW YOUR VEHICLE Panel Mode Climate Control OFF Button FRONT CLIMATE BUTTON Air comes from the outlets in the instrument Press and release this button to turn the Press and release this button to change the panel. Each of these outlets can be individually Climate Control ON/OFF.
  • Page 49 GETTING TO KNOW YOUR VEHICLE BLOWER CONTROL REAR PASSENGER CLIMATE CONTROL OFF CAUTION! BUTTON Blower Control is used to regulate the amount Interior air enters the Rear Automatic Temperature of air forced through the Climate Control Press and release this button to turn the Rear Control system through an intake grille, located in the system.

  • Page 50: Climate Voice Commands

    GETTING TO KNOW YOUR VEHICLE PANEL MODE Recirculation mode during Winter months is not LIMATE OICE OMMANDS recommended, because it may cause window fogging. Air comes from the outlets in the headliner. Adjust vehicle temperatures hands-free and keep Vacation/Storage Each of these outlets can be individually everyone comfortable while you keep moving ahead (If adjusted to direct the flow of air.

  • Page 51: Interior Storage And Equipment

    GETTING TO KNOW YOUR VEHICLE INTERIOR STORAGE AND EQUIPMENT Operating Tips Chart Front Door Storage Both interior front door panels have multiple pockets for WEATHER CONTROL SETTINGS TORAGE storage. Set the mode control to Glove Compartment WARNING! (Panel Mode), The glove compartment is located on the passenger side (A/C) on, and blower on If containers of hot liquid are placed in the bottle Hot Weather And Vehicle...
  • Page 52 GETTING TO KNOW YOUR VEHICLE Instrument Panel Drawer Front Seatback Storage — If Equipped To access the storage bins with front seats in the rearward position, place the lock rod in the unlocked There is a storage drawer located in the lower center of the The front seatbacks have a storage pocket on some models.
  • Page 53 GETTING TO KNOW YOUR VEHICLE CAUTION! CAUTION! The storage bin cover must lie flat and be latched to The storage bin cover must lie flat and be latched to avoid damage from contact with the front seat tracks, avoid damage from contact with the front seat tracks, which have minimal clearance to the cover.

  • Page 54: Usb/Aux Control

    GETTING TO KNOW YOUR VEHICLE USB/AUX C NOTE: There are multiple USB “Charge Only” ports in this vehicle. ONTROL The USB “Charge Only” ports will recharge battery  On the back of the front row seats (if equipped). There are numerous USB ports located throughout the operated USB devices when connected.

  • Page 55: Power Outlets

    GETTING TO KNOW YOUR VEHICLE NOTE: OWER UTLETS The front power outlet can be changed to battery powered Your vehicle is equipped with 12 Volt (15 Amp) power at all times by switching the power outlet fuse in the Power outlets that can be used to power cellular phones, small Distribution Center panel from fuse location F95A to F95B.

  • Page 56: Windows

    GETTING TO KNOW YOUR VEHICLE WINDOWS WARNING! To avoid serious injury or death: OWER INDOWS  Only devices designed for use in this type of outlet The window switches on the driver’s door trim panel should be inserted into any 12 Volt outlet. control all of the door windows.

  • Page 57: Automatic Window Features

    GETTING TO KNOW YOUR VEHICLE Sliding Side Door Power Window Control — If Equipped UTOMATIC INDOW EATURES ESET Second row passengers may open and close the sliding Auto-Down Feature To reactivate the Auto Up feature, perform the following door window by a single control on the door handle steps after vehicle power is restored: assembly.

  • Page 58: Hood

    GETTING TO KNOW YOUR VEHICLE HOOD WARNING! Be sure the hood is fully latched before driving your PENING vehicle. If the hood is not fully latched, it could open The hood release lever (to open the primary latch) and when the vehicle is in motion and block your vision. safety latch (to open the secondary latch) must be Failure to follow this warning could result in serious released to open the hood.

  • Page 59: To Lock/Close The Liftgate

    GETTING TO KNOW YOUR VEHICLE The key fob and the overhead console button will release Using the previous ways to open or close the liftgate: LOSE IFTGATE the liftgate when the liftgate is locked. The outside handle  When the liftgate is fully closed, the liftgate will open requires the liftgate to be unlocked.

  • Page 60: Cargo Area Features

    GETTING TO KNOW YOUR VEHICLE NOTE: The key fob and the overhead console button will operate ARGO EATURES the liftgate when the liftgate is locked. The outside handle If the power liftgate will not fully open or latch close, check Cargo Area Storage requires the liftgate to be unlocked.

  • Page 61: Getting To Know Your Instrument Panel

    GETTING TO KNOW YOUR INSTRUMENT PANEL BASE INSTRUMENT CLUSTER...

  • Page 62: Base Instrument Cluster Descriptions

    GETTING TO KNOW YOUR INSTRUMENT PANEL Temperature Gauge NSTRUMENT LUSTER CAUTION!  The temperature gauge shows engine coolant ESCRIPTIONS temperature. Any reading within the normal range Driving with a hot engine cooling system could damage indicates that the engine cooling system is oper- your vehicle.

  • Page 63: Premium Instrument Cluster

    GETTING TO KNOW YOUR INSTRUMENT PANEL PREMIUM INSTRUMENT CLUSTER...

  • Page 64: Premium Instrument Cluster Descriptions

    GETTING TO KNOW YOUR INSTRUMENT PANEL show you how systems are working and give you warnings REMIUM NSTRUMENT LUSTER CAUTION! when they are not. The steering wheel mounted controls ESCRIPTIONS allow you to scroll through and enter the main menus and Driving with a hot engine cooling system could damage submenus.

  • Page 65: Oil Life Reset

    GETTING TO KNOW YOUR INSTRUMENT PANEL The instrument cluster display controls allows the driver to the information screens or submenu screens of a main when associated with a scheduled maintenance may select information by pushing the directional buttons menu item. result in damage due to not properly maintaining the mounted on the steering wheel: engine oil.

  • Page 66: Keysense Cluster Messages - If Equipped

    GETTING TO KNOW YOUR INSTRUMENT PANEL — I ENSE LUSTER ESSAGES QUIPPED When the KeySense key is in use there will be:  Continuous, dedicated telltale  Unique Display Splash Screen With KeySense in use there will be multiple associated messages shown in the following table: Setting Instrument Cluster Display Message None –...

  • Page 67: Instrument Cluster Display Menu Items

    GETTING TO KNOW YOUR INSTRUMENT PANEL of the low tire displayed in a different color than the other Battery Voltage NSTRUMENT LUSTER ISPLAY tire pressure value. Displays the actual battery voltage. TEMS If the Tire Pressure system requires service, “Service Tire Engine Hours —...
  • Page 68 GETTING TO KNOW YOUR INSTRUMENT PANEL Trip Info Screen Setup Center Push and release the up or down arrow button Push and release the up or down arrow button Current (MPG, until the Trip Menu item is highlighted in the instrument until the Screen Setup Menu displays in the instrument L/100km, or Trip A Distance...

  • Page 69: Battery Saver On/Battery Saver Mode Message - Electrical Load Reduction Actions - If Equipped

    GETTING TO KNOW YOUR INSTRUMENT PANEL Odometer These messages indicate the vehicle battery has a low  Unusual driving cycles (short trips separated by long state of charge and continues to lose electrical charge at parking periods).  Show a rate that the charging system cannot sustain. ...

  • Page 70: Warning Lights And Messages

    GETTING TO KNOW YOUR INSTRUMENT PANEL WARNING LIGHTS AND MESSAGES Battery Charge Warning Light NOTE: The light may flash momentarily during sharp cornering This warning light will illuminate when the The warning/indicator lights will illuminate in the maneuvers, which change fluid level conditions. The battery is not charging properly.
  • Page 71 GETTING TO KNOW YOUR INSTRUMENT PANEL Door Open Warning Light — If Equipped NOTE: Hood Open Warning Light This light may turn on if the accelerator and brake pedals This warning light will illuminate when a door is This warning light will illuminate when the hood are pressed at the same time.

  • Page 72: Yellow Warning Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL Seat Belt Reminder Warning Light Vehicle Security Warning Light — Electronic Stability Control (ESC) Active If Equipped Warning Light — If Equipped This warning light indicates when the driver or passenger seat belt is unbuckled. When the This warning light will flash at a fast rate for This warning light will indicate when the ESC ignition is first placed in the ON/RUN or ACC/...
  • Page 73 GETTING TO KNOW YOUR INSTRUMENT PANEL Engine Check/Malfunction Indicator Service Stop/Start System Warning Light — CAUTION! Warning Light (MIL) If Equipped Prolonged driving with the Malfunction Indicator Light The Engine Check/Malfunction Indicator Light This warning light will illuminate when the (MIL) on could cause damage to the vehicle control (MIL) is a part of an Onboard Diagnostic System Stop/Start system is not functioning properly...

  • Page 74: Yellow Indicator Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL Each tire, including the spare (if provided), should be reasons, including the installation of replacement or REEN NDICATOR IGHTS checked monthly when cold and inflated to the inflation alternate tires or wheels on the vehicle that prevent the Cruise Control Set Indicator Light —...

  • Page 75: White Indicator Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL Stop/Start Active Indicator Light — NDICATOR IGHTS CAUTION! If Equipped High Beam Indicator Light  Prolonged driving with the MIL on could cause further This indicator light will illuminate when the damage to the emission control system. It could also This indicator light will illuminate to indicate Stop/Start function is in “Autostop”...

  • Page 76: Emissions Inspection And Maintenance

    GETTING TO KNOW YOUR INSTRUMENT PANEL Your vehicle has a simple ignition actuated test, which you If your OBD II system is not ready, you should see an WARNING! can use prior to going to the test station. To check if your authorized dealer or repair facility.

  • Page 77: Starting And Operating

    STARTING AND OPERATING STARTING THE ENGINE Start the engine with the gear selector in the NEUTRAL (N)  Push the ENGINE START/STOP button a third time to or PARK (P) position. Apply the brake before shifting to any return the ignition to the OFF position (instrument driving range.
  • Page 78 STARTING AND OPERATING WARNING! CAUTION! WARNING! Engine will remain running.  AutoPark is a supplemental feature. It is not  Your vehicle could move and injure you and others if designed to replace the need to shift your vehicle it is not in PARK. Check by trying to move the trans- into PARK.

  • Page 79: Cold Weather Operation

    STARTING AND OPERATING To Turn On The Engine Using ENGINE START/STOP Button EATHER PERATION WARNING! The transmission must be in PARK or NEUTRAL. –22°F O −30°C) ELOW  When exiting the vehicle, always make sure the igni- Press and hold the brake pedal while pushing the tion is in the OFF position, remove the key fob from To ensure reliable starting at these temperatures, use of ENGINE START/STOP button once.

  • Page 80: To Turn Off The Engine Using Engine Start/Stop

    STARTING AND OPERATING ENGINE BREAK-IN RECOMMENDATIONS For ambient temperatures below 0°F (-18°C), the engine NGINE SING block heater is recommended. For ambient temperatures ENGINE START/STOP B UTTON below -20°F (-29°C), the engine block heater is required. A long break-in period is not required for the engine and drivetrain (transmission and axle) in your vehicle.

  • Page 81: Parking Brake

    STARTING AND OPERATING PARKING BRAKE To apply the parking brake manually, push the switch To release the parking brake manually, the ignition switch momentarily. You may hear a sound from the back of the must be in the ON/RUN position. Press on the brake vehicle while the parking brake engages.
  • Page 82 STARTING AND OPERATING SafeHold WARNING! CAUTION! SafeHold is a safety feature of the Electric Park Brake If the Brake System Warning Light remains on with the  Never leave children alone in a vehicle, or with (EPB) system that will engage the parking brake access to an unlocked vehicle.

  • Page 83: Automatic Transmission

    STARTING AND OPERATING AUTOMATIC TRANSMISSION Brake Service Mode has requirements that must be met in WARNING! order to be activated: You must press and hold the brake pedal while shifting out  The vehicle must be at a standstill.  Unintended movement of a vehicle could injure of PARK.

  • Page 84: Ignition Park Interlock

    STARTING AND OPERATING The electronically controlled transmission adapts its shift RAKE RANSMISSION HIFT CAUTION! schedule based on driver inputs, along with environmental (BTSI) S NTERLOCK YSTEM and road conditions. The transmission electronics are Damage to the transmission may occur if the following self-calibrating;...

  • Page 85: Gear Ranges

    STARTING AND OPERATING ANGES CAUTION! CAUTION! Do not press the accelerator pedal when shifting from Towing the vehicle, coasting, or driving for any other  DO NOT race the engine when shifting from PARK or PARK or NEUTRAL into another gear range. reason with the transmission in NEUTRAL can cause NEUTRAL into another gear range, as this can NOTE:...

  • Page 86: Active Noise Cancellation

    STARTING AND OPERATING ACTIVE NOISE CANCELLATION converter clutch, and shifts into EIGHTH or NINTH gear, Shift into the desired gear range. If the problem is no are inhibited until the transmission fluid is warm longer detected, the transmission will return to normal operation.

  • Page 87: Stop/Start System - If Equipped

    STARTING AND OPERATING If the “SERVICE POWER STEERING" or "POWER  If Stop/Start is manually disabled by the Stop/Start UTOSTOP STEERING ASSIST OFF - SERVICE SYSTEM” OFF button. message and a steering wheel icon are The Stop/Start feature is enabled after every normal ...

  • Page 88: To Start The Engine While In Auto Stop/Start

    STARTING AND OPERATING TART NGINE HILE ANUALLY ANUALLY TART TART YSTEM TART YSTEM While in a forward gear, the engine will start when the After turning off the Stop/Start system, push the Stop/ brake pedal is released or the accelerator pedal is Start OFF switch again (located on the switch bank).

  • Page 89: Cruise Control Systems - If Equipped

    STARTING AND OPERATING CRUISE CONTROL SYSTEMS — IF EQUIPPED When the vehicle has reached the desired speed, push WARNING! the SET (+) or SET (-) button and release. Release the accelerator and the vehicle will operate at the selected Your vehicle may be equipped with the Cruise Control Cruise Control can be dangerous where the system speed.

  • Page 90: Parksense Rear Park Assist

    STARTING AND OPERATING PARKSENSE REAR PARK ASSIST — USING CRUISE CONTROL ON HILLS  The automatic braking function can be enabled/ disabled from the Customer Programmable Features The transmission may downshift on hills to maintain the IF EQUIPPED section of the Uconnect system. vehicle set speed.

  • Page 91: Parksense Sensors

    STARTING AND OPERATING ParkSense can be active only when the gear selector is in If an obstacle is detected in the center rear region, the ENSE ARNING ISPLAY REVERSE. If ParkSense is enabled at this gear selector display will show a single solid arc in the center rear region position, the system will remain active until the vehicle The ParkSense Warning screen will only be displayed if and will produce a one-half second tone.
  • Page 92 STARTING AND OPERATING Rear ParkSense Arcs 1 — Continuous Tone/Flashing Arc 4 — Slow Tone/Solid Arc 2 — Fast Tone/Flashing Arc 5 — Slow Tone/Solid Arc 3 — Fast Tone/Flashing Arc 6 — Single 1/2 Second Tone/Solid Arc...

  • Page 93: Enabling And Disabling Parksense

    STARTING AND OPERATING The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: WARNING ALERTS Rear Distance Greater than 79-59 inches...

  • Page 94: Cleaning The Parksense System

    STARTING AND OPERATING  ParkSense should be disabled when the liftgate is in LEANING ENSE YSTEM CAUTION! the open position. Clean the ParkSense sensors with water, car wash soap,  Use the ParkSense switch to turn the ParkSense  ParkSense is only a parking aid and it is unable to and a soft cloth.

  • Page 95: Refueling The Vehicle

    STARTING AND OPERATING REFUELING THE VEHICLE When the vehicle is shifted out of REVERSE with camera WARNING! delay turned on, the camera image will continue to be displayed for up to 10 seconds unless the vehicle speed There is no fuel filler cap. Two flapper doors inside the pipe Drivers must be careful when backing up even when exceeds 8 mph (13 km/h), the vehicle is shifted into seal the system.

  • Page 96: Vehicle Loading

    STARTING AND OPERATING NOTE: NOTE: Payload In certain cold conditions, ice may prevent the fuel door In certain cold conditions, ice may prevent the fuel filler The payload of a vehicle is defined as the allowable load from opening. If this occurs, lightly push around the door from opening.

  • Page 97: Trailer Towing

    STARTING AND OPERATING Inflation Pressure Improper weight distributions can have an adverse effect OMMON OWING EFINITIONS on the way your vehicle steers and handles and the way This is the cold tire inflation pressure for your vehicle for the brakes operate. The following trailer towing related definitions will assist all loading conditions up to full GAWR.
  • Page 98 STARTING AND OPERATING Gross Axle Weight Rating (GAWR) Trailer Sway Control (TSC) Weight-Distributing Hitch The GAWR is the maximum capacity of the front and rear The TSC can be a mechanical telescoping link that can be A Weight-Distributing Hitch works by applying leverage axles.

  • Page 99: Trailer Hitch Classification

    STARTING AND OPERATING RAILER ITCH LASSIFICATION The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Trailer Hitch Classification Definitions Class Max.

  • Page 100: Vehicle Loading Chart

    STARTING AND OPERATING Determine occupant count.  Load Capacity = GVWR – CURB = 6,005 lb (2,723 kg) - EHICLE OADING HART 4,500 lb (2,041 kg) = 1,505 lb (682 kg)  For calculation purposes, average weight of an Follow these steps to determine the total weight the 4 Occupants (at 150 lb [68 kg]) + Max Trailer = occupant is 150 lb (68 kg).

  • Page 101: Trailer And Tongue Weight

    STARTING AND OPERATING RAILER ONGUE EIGHT OWING EQUIREMENTS WARNING! Never exceed the maximum tongue weight stamped on To promote proper break-in of your new vehicle drivetrain  When hauling cargo or towing a trailer, do not over- your fascia/bumper or trailer hitch. components, the following guidelines are recommended.
  • Page 102 STARTING AND OPERATING Towing Requirements — Tires Towing Requirements — Trailer Lights And WARNING! Wiring  Do not attempt to tow a trailer while using a compact  Do not connect trailer brakes to your vehicle's spare tire. Whenever you pull a trailer, regardless of the trailer size, hydraulic brake lines.

  • Page 103: Towing Tips

    STARTING AND OPERATING OWING Before towing, practice turning, stopping, and backing up the trailer in an area located away from heavy traffic. Automatic Transmission Select the DRIVE range when towing. The transmission controls include a drive strategy to avoid frequent shifting when towing.

  • Page 104: Recreational Towing (Behind Motorhome)

    STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME) OWING EHICLE EHIND NOTHER EHICLE Towing Condition Wheel OFF The Ground FWD Models Flat Tow NONE NOT ALLOWED Front Dolly Tow Rear NOT ALLOWED On Trailer NOTE:  To avoid inadvertent Electric Park Brake (EPB) engagement, you must ensure that the Auto Park Brake feature is disabled before towing this vehicle (if rear wheels are on the ground). The Auto Park Brake feature is enabled or disabled via the customer programmable features page 106.

  • Page 105: Driving Tips

    STARTING AND OPERATING DRIVING TIPS Traction Recreational Towing Front-Wheel Drive (FWD) Models When driving on wet or slushy roads, it is possible for a RIVING LIPPERY URFACES wedge of water to build-up between the tire and road Recreational towing is allowed ONLY if the front wheels surface.

  • Page 106: Driving Through Water

    STARTING AND OPERATING Shallow Standing Water RIVING HROUGH ATER CAUTION! Although your vehicle is capable of driving through shallow Driving through water more than a few inches/  Determine the condition of the road or the path that standing water, consider the following Warnings and centimeters deep will require extra caution to ensure is under water and if there are any obstacles in the Cautions before doing so.

  • Page 107: Multimedia

    MULTIMEDIA UCONNECT SYSTEMS UCONNECT SETTINGS The risk of unauthorized and unlawful access to your vehicle systems may still exist, even if the most recent version of vehicle software (such as Uconnect software) is For detailed information about your Uconnect 5 With The Uconnect system uses a combination of buttons on installed.

  • Page 108: Customer Programmable Features

    MULTIMEDIA For the Uconnect 5 With 7-inch Display and the Uconnect When making a selection, press the button on the USTOMER ROGRAMMABLE EATURES 5/5 NAV With 10.1-inch Display touchscreen to enter the desired menu. Once in the desired menu, press and release the preferred setting Press the Vehicle button, then press the Settings tab on option until a check mark appears next to the setting, the top of the touchscreen.
  • Page 109 MULTIMEDIA KeySense The vehicle’s KeySense settings are protected by a unique four-digit PIN, which the vehicle owner creates when accessing the specific settings for the first time. This four-digit PIN can only be reset by an authorized dealer. After pressing the KeySense button on the touchscreen, and entering the KeySense PIN, the following settings will be available: NOTE: Depending on the vehicle’s options, feature settings may vary.
  • Page 110 MULTIMEDIA Setting Name Description This setting will change the type of alert provided when an object is detected in a vehicle’s blind spot. The “Lights” setting will activate the Blind Spot Alert lights on the outside Blind Spot Alert mirrors. The “Lights & Chime” setting will activate both the lights on the outside mirrors and an audible chime.
  • Page 111 MULTIMEDIA Setting Name Description Set Theme This setting will allow you to change the theme of the radio. This setting will allow you to adjust the brightness of your theme. Setting options are Theme Mode “Light”, “Dark” and “Auto”. Select to show themes in Light or Dark mode. “Auto” changes the theme with the headlights.
  • Page 112 MULTIMEDIA Setting Name Description This setting will turn the radio off when the driver or passenger door is opened. The Radio Off With Door available settings are “On” and “Off”. App Drawer Favoriting Popups This setting will allow you to favorite app drawer pop-ups with “On” and “Off” options. App Drawer Unfavoritings Popups This setting will allow you to unfavorite app drawer pop-ups with “On”...
  • Page 113 MULTIMEDIA Display After pressing the Display button on the touchscreen, the following settings will be available: NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description This setting will change the language of the Uconnect system and Instrument Cluster Language Display.
  • Page 114 MULTIMEDIA Setting Name Description Touchscreen Beep This setting will allow you to turn the touchscreen beep on or off. Show Main Category Bar Labels This setting will allow the main category bar labels to be shown on or off. This setting allows you to set the Control Screen to turn off automatically after five Control Screen Timeout seconds or stay open until manually closed.
  • Page 115 MULTIMEDIA Setting Name Description This setting will turn the Pedestrian Emergency Braking system “Off” or to “Warning & Pedestrian Emergency Braking — Located In Automatic Emergency Braking Submenu Active Braking”. This setting will change the type of ParkSense alert when a close object is detected. The “Sound Only”...
  • Page 116 MULTIMEDIA Clock & Date After pressing the Clock & Date button on the touchscreen, the following settings will be available: NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description This setting will sync the time to the GPS receiver in the system. The system will control Sync Time With GPS the time via the GPS location.
  • Page 117 MULTIMEDIA Phone/Bluetooth® When the Phone/Bluetooth® button is pressed on the touchscreen, the system displays the options related to Bluetooth® connectivity from an external audio device or smartphone. The list of paired audio devices or smartphones can be accessed from this menu. NOTE: Depending on the vehicle’s options, feature settings may vary.
  • Page 118 MULTIMEDIA Voice — If Equipped After pressing the Voice button on the touchscreen, the following settings will be available: NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description Voice Options This setting will allow you to change the voice options for the radio to “Male” or “Female”. Wake Up Word This setting will allow you to turn the voice recognition “Wake Up”...
  • Page 119 MULTIMEDIA Camera When the Camera button is pressed on the touchscreen, the system displays the options related to the vehicle’s camera features. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description This setting will add a timed delay to the ParkView Backup Camera when shifting out of ParkView Backup Camera Delay REVERSE.
  • Page 120 MULTIMEDIA Lights When the Lights button is pressed on the touchscreen, the system displays the options related to the vehicle’s exterior and interior lights. NOTE:  When the “Daytime Running Lights” feature is selected, the daytime running lights can be turned on or off. This feature is only allowed by law in the country of the vehicle purchase. ...
  • Page 121 MULTIMEDIA Brakes After pressing the Brakes button on the touchscreen, the following settings will be available: NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description Auto Park Brake This setting will turn the Auto Park Brake on or off. Brake Service This setting will allow you to retract the brakes for servicing.
  • Page 122 MULTIMEDIA Setting Name Description This setting will change how many pushes of the Unlock button on the key fob are needed to unlock all the doors. The “Driver Door” setting will only unlock the driver door on the Remote Door Unlock, Door Lock/1st Press Of Key Fob Unlocks first push on the Unlock button.
  • Page 123 MULTIMEDIA Key Off Options When the Key Off Options button is pressed on the touchscreen, the system displays the options related to vehicle shutoff. These settings will only activate when the ignition is set to OFF. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description This setting will keep certain electrical features running after the engine is turned off.
  • Page 124 MULTIMEDIA Setting Name Description This setting will adjust audio volume as speeds increase. At a higher setting, the volume Speed Adjusted Volume will increase more as the vehicle speeds up. The available settings are “Off”, “1”, “2”, and “3”. Surround Sound This setting will turn the Surround Sound system on or off.
  • Page 125 MULTIMEDIA Setting Name Description Navigation Popups This setting turns navigation pop-ups on or off. The setting turns receiving notifications for SiriusXM® Travel Link Weather Alerts on or SiriusXM® Travel Link Weather Alerts off. SiriusXM® Setup When the SiriusXM® Setup button is pressed on the touchscreen, the system displays options related to SiriusXM® satellite radio. These settings can be used to skip specific radio channels and restart favorite songs from the beginning.
  • Page 126 MULTIMEDIA System Information When the System Information button is pressed on the touchscreen, the system displays the radio system information. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description When this feature is selected, a Version Information screen will appear, displaying Version Information information about the version of your radio.

  • Page 127: Radio Operation And Mobile Phones

    MULTIMEDIA Setting Name Description This setting will display a pop-up that gives you the option to clear all personal data from Clear Personal Data the system, including Bluetooth® devices and presets. Reset Wi-Fi Password for Projection This setting will reset your Wi-Fi password for projection. This setting will factory reset the radio.

  • Page 128: Safety

    SAFETY SAFETY FEATURES Anti-Lock Brake System (ABS) Warning WARNING! Light (ABS)  The ABS contains sophisticated electronic equip- RAKE YSTEM The yellow ABS Warning Light will turn on when the ignition ment that may be susceptible to interference caused is placed in the ON/RUN mode and may stay on for as long The ABS provides increased vehicle stability and brake by improperly installed or high output radio transmit- as four seconds.

  • Page 129: Electronic Brake Control (Ebc) System

    SAFETY Brake System Warning Light Your vehicle may also be equipped with Dynamic Steering WARNING! Torque (DST), Ready Alert Braking (RAB), Rain Brake The red Brake System Warning Light will turn on when the Support (RBS) and Trailer Sway Control (TSC). ...
  • Page 130 SAFETY Electronic Brake Force Distribution (EBD) Electronic Stability Control (ESC) WARNING! The EBD function manages the distribution of the braking ESC enhances directional control and stability of the  Electronic Stability Control (ESC) cannot prevent the torque between the front and rear axles by limiting braking vehicle under various driving conditions.
  • Page 131 SAFETY ESC Operating Modes The ESC Activation/Malfunction Indicator Light starts to WARNING! flash as soon as the tires lose traction and the ESC system Depending upon model and mode of operation, the ESC becomes active. The ESC Activation/Malfunction Indicator  When in “Partial Off” mode, the TCS functionality of system may have multiple operating modes.
  • Page 132 SAFETY Disabling And Enabling HSA Rain Brake Support (RBS) The following conditions must be met in order for HSA to activate: This feature can be turned on or turned off. To change the RBS may improve braking performance in wet conditions. ...

  • Page 133: Auxiliary Driving Systems

    SAFETY When the vehicle is started, the BSM Warning Light will The BSM system can become blocked if snow, ice, mud, or WARNING! momentarily illuminate in both outside rearview mirrors to other road contaminations accumulate on the rear fascia/ let the driver know that the system is operational. The bumper where the radar sensors are located.
  • Page 134 SAFETY The BSM system notifies the driver of objects in the Entering From The Side Overtaking Traffic detection zones by illuminating the BSM Warning Light Vehicles that move into your adjacent lanes from either If you pass another vehicle slowly with a relative speed located in the outside mirrors in addition to sounding an side of the vehicle.
  • Page 135 SAFETY Rear Cross Path (RCP) NOTE: The BSM system is designed not to issue an alert on stationary objects such as guardrails, posts, walls, foliage, In a parking lot situation, oncoming vehicles can be RCP is intended to aid the driver when backing out of berms, snow banks, car washes, etc.

  • Page 136: Forward Collision Warning (Fcw) With Mitigation - If Equipped

    SAFETY (FCW) Blind Spot Alert Lights/Chime the brakes. If a pedestrian is encountered in the path at ORWARD OLLISION ARNING the same speed threshold, the system will also attempt to When operating in Blind Spot Alert Lights/Chime mode, — I ITIGATION QUIPPED bring the vehicle to a stop.
  • Page 137 SAFETY FCW Braking Status And Sensitivity  The FCW system is intended for on-road use only. If the  Changing the FCW status to “Off” prevents the system vehicle is taken off-road, the FCW system should be from providing autonomous braking, or additional The FCW Sensitivity and Active Braking status are deactivated to prevent unnecessary warnings to the brake support if the driver is not braking adequately in...

  • Page 138: Tire Pressure Monitoring System (Tpms)

    SAFETY Pedestrian Emergency Braking (PEB) — The PEB button is located in the Uconnect display in the The tire pressure will vary with temperature by approximately 1 psi (7 kPa) for every 12°F (6.5°C). This Controls settings page 105. Ú If Equipped means that when the outside temperature decreases, the To turn the PEB system off, push the Pedestrian...
  • Page 139 SAFETY Premium System the measured tire pressure is 28 psi (193 kPa), a CAUTION! temperature drop to 20°F (-7°C) will decrease the tire The Tire Pressure Monitoring System (TPMS) uses wireless pressure to approximately 24 psi (165 kPa). This tire ...
  • Page 140 SAFETY If the ignition is cycled, this sequence will repeat, providing “SERVICE TPM SYSTEM” message for five seconds the system fault still exists. If the system fault no longer and then display dashes (--) in place of the pressure exists, the TPMS Warning Light will no longer flash, and value.

  • Page 141: Occupant Restraint Systems

    SAFETY OCCUPANT RESTRAINT SYSTEMS TPMS DEACTIVATION — IF EQUIPPED If a child from 2 to 12 years old (not in a rear-facing child restraint) must ride in the front passenger seat, The Tire Pressure Monitoring System (TPMS) can be move the seat as far back as possible and use the Some of the most important safety features in your vehicle deactivated if replacing all four wheel and tire assemblies proper child restraint...

  • Page 142: Seat Belt Systems

    SAFETY Initial Indication The outboard front passenger seat BeltAlert is not active WARNING! when the outboard front passenger seat is unoccupied. If the driver is unbuckled when the ignition switch is first in BeltAlert may be triggered when an animal or other items the START or ON/RUN position, a chime will signal for a ...
  • Page 143 SAFETY WARNING! WARNING! WARNING!  Relying on the air bags alone could lead to more  Two people should never be belted into a single seat  A seat belt that is worn under your arm is dangerous. severe injuries in a collision. The air bags work with belt.
  • Page 144 SAFETY Lap/Shoulder Belt Operating Instructions Position the shoulder belt across the shoulder and chest with minimal, if any slack so that it is Enter the vehicle and close the door. Sit back and comfortable and not resting on your neck. The adjust the seat.
  • Page 145 SAFETY Remove the mini-latch plate and regular latch plate WARNING! from its stowed position in the headliner slightly behind the second or third row seat.  Wearing your seat belt incorrectly could make your injuries in a collision much worse. You might suffer internal injuries, or you could even slide out of the seat belt.
  • Page 146 SAFETY Route the shoulder belt to the inside of the left head Sit back in seat. Slide the regular latch plate up the restraint. webbing as far as necessary to allow the seat belt to go around your lap. Latch Plate And Buckle Connected Position the lap belt so that it is snug and lies low across your hips, below your abdomen.
  • Page 147 SAFETY Seat Belt Extender Seat Belts And Pregnant Women If a seat belt is not long enough to fit properly, even when the webbing is fully extended and the adjustable upper shoulder belt anchorage (if equipped) is in its lowest position, an authorized dealer can provide you with a Seat Belt Extender.
  • Page 148 SAFETY Seat Belt Pretensioner The figure below illustrates the locking feature for each seating position. The front outboard seat belt system is equipped with pretensioning devices that are designed to remove slack from the seat belt in the event of a collision. These devices may improve the performance of the seat belt by removing slack from the seat belt early in a collision.
  • Page 149 SAFETY WARNING! WARNING!  Never place a rear-facing child restraint in front of an  The seat belt assembly must be replaced if the air bag. A deploying passenger front air bag can switchable Automatic Locking Retractor (ALR) cause death or serious injury to a child 12 years or feature or any other seat belt function is not working younger, including a child in a rear-facing child properly when checked according to the procedures...

  • Page 150: Supplemental Restraint Systems (Srs)

    SAFETY  Supplemental Knee Air Bags  The Air Bag Warning Light does not come on during the WARNING! four to eight seconds when the ignition switch is first in  Front and Side Impact Sensors the ON/RUN position.  Seat Belt Pretensioners Do not place the seat belt webbing behind the third row ...
  • Page 151 SAFETY Redundant Air Bag Warning Light comes on intermittently This vehicle may be equipped with a driver and/or front WARNING! or remains on while driving have an authorized dealer passenger seat belt buckle switch that detects whether the driver or front passenger seat belt is buckled. The seat service the vehicle immediately Ú...
  • Page 152 SAFETY Front Air Bag Operation Occupant Classification System (OCS) —  The front passenger seat is unoccupied or has very light objects on it; or Front Passenger Seat Front Air Bags are designed to provide additional  The front passenger seat is occupied by a small protection by supplementing the seat belts.
  • Page 153 SAFETY In order for the OCS to operate as designed, it is important Do not decrease OR increase the front passenger’s seated WARNING! for the front passenger to be seated properly and properly weight on the front passenger seat wearing the seat belt. Properly seated passengers are: ...
  • Page 154 SAFETY  Objects are lodged under the front passenger seat.  Objects are lodged between the front passenger seat and center console.  Accessories that may change the seated weight on the front passenger seat are attached to the front passenger seat.
  • Page 155 SAFETY Knee Impact Bolsters The following requirements must be strictly followed: WARNING!  Do not modify the front passenger seat assembly or The Knee Impact Bolsters help protect the knees of the components in any way.  Do not carry or hold any objects (e.g., backpacks, driver and front passenger, and position the front boxes, etc.) while seated in the front passenger seat.
  • Page 156 SAFETY The SABs may help to reduce the risk of occupant injury Supplemental Side Air Bag Inflatable Curtains (SABICs) The SABICs may help reduce the risk of partial or complete during certain side impacts, in addition to the injury ejection of vehicle occupants through side windows in This vehicle is equipped with Supplemental Side Air Bag reduction potential provided by the seat belts and body certain side impact events.
  • Page 157 SAFETY The Side Air Bags will not deploy in all side collisions, The Side Air Bags and seat belt pretensioners will not WARNING! including some collisions at certain angles, or some side deploy in all rollover events. The rollover sensing system collisions that do not impact the area of the passenger determines if a rollover event may be in progress and ...
  • Page 158 SAFETY If A Deployment Occurs Do not drive your vehicle after the air bags have deployed.  Cut off fuel to the engine (if equipped). If you are involved in another collision, the air bags will not  Cut off battery power to the electric motor (if equipped). The front air bags are designed to deflate immediately be in place to protect you.
  • Page 159 SAFETY NOTE: Maintaining Your Air Bag System Event Data Recorder (EDR) After an accident, remember to cycle the ignition to the This vehicle is equipped with an event data recorder STOP (OFF/LOCK) position and remove the key from the WARNING! (EDR).

  • Page 160: Child Restraints

    SAFETY To read data recorded by an EDR, special equipment is Before buying any restraint system, make sure that it has WARNING! required, and access to the vehicle or the EDR is needed. a label certifying that it meets all applicable Safety In addition to the vehicle manufacturer, other parties, Standards.
  • Page 161 SAFETY Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Children who are two years old or younger and who have Either an Infant Carrier or a Convertible Child Restraint, Infants and Toddlers not reached the height or weight limits of their child facing rearward in a rear seat of the vehicle...
  • Page 162 SAFETY Infant And Child Restraints Older Children And Child Restraints WARNING! Safety experts recommend that children ride rear-facing in Children who are two years old or who have outgrown their Do not install a rear-facing car seat using a rear support the vehicle until they are two years old or until they reach rear-facing convertible child seat can ride forward-facing leg in this vehicle.
  • Page 163 SAFETY Children Too Large For Booster Seats If the answer to any of these questions was “no,” then the WARNING! child still needs to use a booster seat in this vehicle. If the Children who are large enough to wear the shoulder belt child is using the lap/shoulder belt, check seat belt fit ...
  • Page 164 SAFETY Recommendations For Attaching Child Restraints Use Any Attachment Method Shown With An “X” Below Combined Weight of LATCH – Lower Restraint Type the Child + Child Seat Belt + Top Tether LATCH – Lower Seat Belt Only Anchors + Top Tether Restraint Anchor Anchors Only...
  • Page 165 SAFETY LATCH Positions For Installing Child Restraints In This Vehicle Seven Passenger Quad Seating LATCH Positions Eight Passenger LATCH Positions (Includes Stow ‘n Go) Lower Anchorage Symbol (Two Anchorages Per Seating Position) Lower Anchorage Symbol (Two Anchorages Per Seven Passenger Bench Seat LATCH Positions Seating Position) Top Tether Anchorage Symbol Top Tether Anchorage Symbol...
  • Page 166 SAFETY Frequently Asked Questions About Installing Child Restraints With LATCH Never “share” a LATCH anchorage with two or more child restraints. If the center position does not have dedicated Can two child restraints be attached using a common LATCH lower anchorages, use the seat belt to install a child lower LATCH anchorage? seat in the center position next to a child seat using the LATCH anchorages in an outboard position.
  • Page 167 SAFETY Car Seat With Head Restraint Folded LATCH Anchorages (Second Row Anchorages Shown) LATCH Anchorages (Second Row Bench Anchorages Shown) 7 Passenger Stow ‘n Go Seating 7 Passenger Bench Seating 1 — Folded Headrest 2 — Child Restraint Locating The LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback, below the anchorage...
  • Page 168 SAFETY Locating The Upper Tether Anchorages There are tether strap anchorages located behind all second row seating positions. The third row has a tether anchor on the 40% seat for the right outboard position and in the center of the 60% seat for either the center or left outboard seating position.
  • Page 169 SAFETY To Install A LATCH-Compatible Child How To Stow An Unused Switchable-ALR Restraint (ALR) Seat Belt: If the selected seating position has a Switchable When using the LATCH attaching system to install a child Automatic Locking Retractor (ALR) seat belt, stow the seat restraint, stow all ALR seat belts that are not being used by other occupants or being used to secure child belt, following the instructions below.
  • Page 170 SAFETY Installing Child Restraints Using The Please see the table below and the following sections for more information. Vehicle Seat Belt Lap/Shoulder Belt Systems For Installing Child restraint systems are designed to be secured in Child Restraints In This Vehicle vehicle seats by lap belts or the lap belt portion of a lap/ shoulder belt.
  • Page 171 SAFETY Frequently Asked Questions What is the weight limit (child’s weight + weight of the child Always use the tether anchor when using the seat belt to restraint) for using the Tether Anchor with the seat belt to Weight limit of the Child Restraint install a forward-facing child restraint, up to the attach a forward-facing child restraint? recommended weight limit of the child restraint.
  • Page 172 SAFETY Try to pull the webbing out of the retractor. If it is WARNING! WARNING! locked, you should not be able to pull out any webbing. If the retractor is not locked, repeat step 5. Always make sure the head restraint is in its upright ...
  • Page 173 SAFETY Installing Child Restraints Using the Top Tether Anchorage WARNING! Do not attach a tether strap for a rear-facing car seat to any location in front of the car seat, including the seat frame or a tether anchorage. Only attach the tether strap of a rear-facing car seat to the tether anchorage that is approved for that seating position, located behind the top of the vehicle seat.
  • Page 174 SAFETY Third Row Tether Attachment The tether anchorage found on the back of the 60% seat in the third row may be used by either the left outboard or the center seating position. Only tether one child restraint to the tether anchorage at a time. To connect the tether strap hook to the tether anchorage for either seating position on the 60% third row seat: Route the tether strap to provide the most direct...

  • Page 175: Safety Tips

    SAFETY SAFETY TIPS ONNECTED EHICLES Privacy of any wireless and wired communications cannot RANSPORTING ASSENGERS be assured. Third parties may unlawfully intercept information and private communications without your NEVER TRANSPORT PASSENGERS IN THE CARGO AREA. consent. For further information, refer to “Data Collection &...
  • Page 176 SAFETY Air Bag Warning Light WARNING! WARNING! The Air Bag Warning Light will turn on for four to An improperly attached, damaged, folded, or stacked  ONLY use the driver’s side floor mat on the driver’s eight seconds as a bulb check when the floor mat, or damaged floor mat fasteners may cause side floor area.

  • Page 177: Periodic Safety Checks You Should Make Outside The Vehicle

    SAFETY Fluid Leaks Whenever a change is noticed in the sound of the exhaust WARNING! system, when exhaust fumes can be detected inside the Check area under the vehicle after overnight parking for vehicle, or when the underside or rear of the vehicle is ...

  • Page 178: In Case Of Emergency

    IN CASE OF EMERGENCY HAZARD WARNING FLASHERS When you must leave the vehicle to seek assistance, the If equipped, the rearview mirror contains an SOS and Hazard Warning Flashers will continue to operate even ASSIST button. though the ignition is placed in the OFF position. The Hazard Warning Flashers button is located in the WARNING! lower center area of the instrument panel.
  • Page 179 IN CASE OF EMERGENCY SOS Call WARNING! WARNING! Push the SOS Call button on the Rearview Mirror. ALWAYS obey traffic laws and pay attention to the road.  If anyone in the vehicle could be in danger (e.g., fire NOTE: ALWAYS drive safely with your hands on the steering or smoke is visible, dangerous road conditions or In case the SOS Call button is pushed in error, there will be...
  • Page 180 IN CASE OF EMERGENCY SOS Call System Limitations Even if the SOS Call system is fully functional, factors  Never place anything on or near the vehicle’s LTE beyond FCA US LLC’s control may prevent or stop the SOS (voice/data) or 4G (data) and GPS antennas. You could Vehicles sold in Mexico DO NOT have SOS Call system Call system operation.

  • Page 181: Jacking And Tire Changing -If Equipped

    IN CASE OF EMERGENCY CAUTION! WARNING! To avoid damage to the mirror during cleaning, never  The jack is designed to be used as a tool for changing spray any cleaning solution directly onto the mirror. tires only. The jack should not be used to lift the Apply the solution onto a clean cloth and wipe the vehicle for service purposes.

  • Page 182: Equipment Removal

    IN CASE OF EMERGENCY Detailed information about the inflatable spare tire, QUIPMENT EMOVAL its use, and operation can be found on page 236. Ú Remove the access panel to the jacking equipment. Remove Jack by turning the jack screw counter- clockwise to collapse from storage area that is Unlatch the Portable Air Compressor or Tire Service located behind the tire.
  • Page 183 IN CASE OF EMERGENCY CAUTION! WARNING! Do not attempt to raise the vehicle by jacking on  Apply the parking brake firmly and set the transmis- locations other than those indicated in the Jacking sion in PARK. Instructions for this vehicle. ...
  • Page 184 IN CASE OF EMERGENCY Remove the wheel lug nuts, for vehicles with wheel covers, remove the cover from the wheel by hand. Do not pry the wheel cover off. Then pull the wheel off the hub. Install the inflatable spare on the vehicle, located in the rear cargo area of the vehicle.

  • Page 185: Road Tire Installation

    IN CASE OF EMERGENCY NOTE: 12. Place the deflated (flat) tire and foam tray cover NSTALLATION assembly in the rear cargo area. Do not stow the Do not install the wheel cover on the inflatable spare tire. Vehicles Equipped With Wheel Covers deflated tire in the inflatable spare tire location.

  • Page 186: Portable Air Compressor -If Equipped

    IN CASE OF EMERGENCY — Align the valve notch in the wheel cover with the valve Portable Air Compressor Usage With Inflatable Spare Tire ORTABLE OMPRESSOR stem on the wheel. Install the cover by hand, Remove the Portable Air Compressor from the QUIPPED snapping the cover over the two lug nuts.

  • Page 187: Return Inflatable Spare Tire

    IN CASE OF EMERGENCY TIRE SERVICE KIT — IF EQUIPPED NOTE: ETURN NFLATABLE PARE If the tire is overinflated, use the deflation button to To return Inflatable Spare Tire to its storage location. reduce the tire air pressure. Use this QR code to access your digital experience.
  • Page 188 IN CASE OF EMERGENCY Tire Service Kit And Components And Operation Using The Mode Select Knob And Hoses Your Tire Service Kit is equipped with the following symbols to indicate the air or sealant mode.  Selecting Air Mode Push in the Mode Select Knob and turn to this position for air pump operation only.
  • Page 189 IN CASE OF EMERGENCY  When the Tire Service Kit sealant is in a liquid form, WARNING! WARNING! clean water, and a damp cloth will remove the material from the vehicle or tire and wheel components. Once  Do not use Tire Service Kit or drive the vehicle under ...
  • Page 190 IN CASE OF EMERGENCY NOTE: Setting Up To Use Tire Service Kit: label located in the driver-side door opening. Check the tire pressure by looking at the Pressure Gauge. Sealant may leak out through the puncture in the tire. Uncoil the Sealant Hose and then remove the cap from the fitting at the end of the hose.
  • Page 191 IN CASE OF EMERGENCY If tire has improper inflation, see the following the steps. If the tire pressure is 19 psi (1.3 Bar) or higher: WARNING! Uncoil the Sealant Hose, and then remove the cap 1. Push the Power Button to turn on Tire The Tire Service Kit is not a permanent flat tire repair.
  • Page 192 IN CASE OF EMERGENCY NOTE: Sealant Bottle Replacement: Rotate the bottle up beyond vertical to release. Unwrap the power cord.  For sealant bottle installation, follow these steps in reverse order. Unwrap the hose.  The Sealant Bottle is a one tire application use and needs to be replaced after each use.

  • Page 193: Jump Starting

    IN CASE OF EMERGENCY JUMP STARTING NOTE: REPARATIONS TART The positive battery post may be covered with a protective The battery in your vehicle is located on the left side of the If your vehicle has a discharged battery it can be jump cap.

  • Page 194: Refueling In Emergency - If Equipped

    IN CASE OF EMERGENCY REFUELING IN EMERGENCY – IF EQUIPPED Disconnecting The Jumper Cables CAUTION! Disconnect the negative (-) end of the jumper cable The vehicle is equipped with a refueling funnel for a Failure to follow these procedures could result in from the remote negative post of the vehicle with the Cap-Less Fuel System page 180.

  • Page 195: If Your Engine Overheats

    IN CASE OF EMERGENCY IF YOUR ENGINE OVERHEATS NOTE: In certain cold conditions, ice may prevent the fuel door from opening. If this occurs, lightly push on the fuel door If the vehicle is overheating, it will need to be serviced by an authorized dealer.

  • Page 196: Manual Park Release

    IN CASE OF EMERGENCY CAUTION! Driving with a hot cooling system could damage your vehicle. If temperature gauge reads “H”, pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range.

  • Page 197: Freeing A Stuck Vehicle

    IN CASE OF EMERGENCY To Reset The Manual Park Release: Use the least amount of accelerator pedal pressure that CAUTION! will maintain the rocking motion without spinning the Apply firm pressure to the brake pedal while seated wheels or racing the engine. in the driver’s seat.

  • Page 198: Towing A Disabled Vehicle

    IN CASE OF EMERGENCY TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial towing service. Towing Condition Wheel OFF The Ground ALL MODELS Flat Tow NONE NOT ALLOWED Front ACCEPTABLE METHOD Wheel Lift Or Dolly Tow Rear NOT ALLOWED Flatbed...

  • Page 199: Enhanced Accident Response System (Ears)

    IN CASE OF EMERGENCY CAUTION! CAUTION!  Do not use sling-type equipment when towing. Recovery load should: Vehicle damage may occur.  Be applied at constant speed.  Be applied parallel to the center line of the length of  When securing the vehicle to a flatbed truck, do not the vehicle.

  • Page 200: Servicing And Maintenance

    SERVICING AND MAINTENANCE SCHEDULED SERVICING An authorized dealer will reset the oil change indicator Once A Month Or Before A Long Trip: message after completing the scheduled oil change. If a  Check engine oil level. scheduled oil change is performed by someone other than Your vehicle is equipped with an automatic oil change ...

  • Page 201: Maintenance Plan

    SERVICING AND MAINTENANCE AINTENANCE Refer to the Maintenance Plan for required maintenance. At Every Oil Change Interval As Indicated By Oil Change Indicator System:  Change oil and filter.  Rotate the tires at the first sign of irregular wear, even if it occurs before the oil indicator system turns on. ...
  • Page 202 SERVICING AND MAINTENANCE Mileage Or Time Passed (Whichever Comes First) Or Years: Or Kilometers: Inspect the brake linings, parking brake function. Inspect front accessory drive tensioner, idler pulley, and replace if necessary. Additional Maintenance Replace engine air cleaner filter. Replace cabin air filter. To be replaced every 12,000 miles (19,000 km).

  • Page 203: Engine Compartment

    SERVICING AND MAINTENANCE ENGINE COMPARTMENT 3.6L E NGINE 1 — Engine Coolant Pressure Cap 5 — Windshield Washer Reservoir Cap 2 — Brake Fluid Reservoir Cap 6 — Engine Oil Fill 3 — Engine Air Cleaner Filter 7 — Engine Oil Dipstick 4 —...

  • Page 204: Checking Oil Level

    SERVICING AND MAINTENANCE HECKING EVEL DDING ASHER LUID AINTENANCE ATTERY To ensure proper engine lubrication, the engine oil must The fluid reservoir is located in the front of the engine Your vehicle is equipped with a maintenance-free battery. be maintained at the correct level. Check the oil level at compartment.

  • Page 205: Pressure Washing

    SERVICING AND MAINTENANCE VEHICLE MAINTENANCE NGINE CAUTION! Engine Oil Selection An authorized dealer has the qualified service personnel,  It is essential when replacing the cables on the special tools, and equipment to perform all service battery that the positive cable is attached to the posi- Use only the manufacturer's recommended fluid operations in an expert manner.

  • Page 206: Engine Oil Filter

    SERVICING AND MAINTENANCE Synthetic Engine Oils NGINE LEANER ILTER WARNING! Your engine was designed for synthetic engine oils, only For the proper maintenance intervals page 199. Ú  You can be badly injured working on or around a use synthetic API approved engine oils. motor vehicle.

  • Page 207: Air Conditioner Maintenance

    SERVICING AND MAINTENANCE Refrigerant Recovery And Recycling — Conditions that would require replacement: WARNING! R–1234yf  Rib chunking (one or more ribs has separated from belt body)  Use only refrigerants and compressor lubricants R–1234yf Air Conditioning Refrigerant is a Hydrofluo- approved by the manufacturer for your air condi- ...
  • Page 208 SERVICING AND MAINTENANCE The cabin air filter is located in the fresh air inlet behind Open the glove compartment door as far as possible the glove compartment. Perform the following procedure to gain access to the cabin air filter compartment to replace the filter: cover.

  • Page 209: Body Lubrication

    SERVICING AND MAINTENANCE Front Wiper Blade Removal/Installation Once the filter is replaced, reinstall the filter cover, INDSHIELD IPER LADES making sure the retaining tabs are fully secured into their housings. Clean the rubber edges of the wiper blades and the CAUTION! windshield periodically with a sponge or soft cloth and a 10.
  • Page 210 SERVICING AND MAINTENANCE To disengage the wiper blade from the wiper arm, flip Slide the wiper blade up into the hook on the wiper up the release tab on the wiper blade and while arm and rotate the wiper blade until it is flush against holding the wiper arm with one hand, slide the wiper the wiper arm.

  • Page 211: Exhaust System

    SERVICING AND MAINTENANCE Lift the rear wiper arm fully off the glass. Lower the wiper blade onto the glass and snap the wiper arm pivot cap back into place. XHAUST YSTEM The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system.

  • Page 212: Cooling System

    SERVICING AND MAINTENANCE Engine Coolant Checks To minimize the possibility of catalytic converter damage: CAUTION!  Do not interrupt the ignition when the transmission is Check the engine coolant (antifreeze) protection every  The catalytic converter requires the use of unleaded in gear and the vehicle is in motion.
  • Page 213 SERVICING AND MAINTENANCE Selection Of Coolant Adding Coolant  Some vehicles require special tools to add coolant properly. Failure to fill these systems properly could Your vehicle has been built with an improved engine For further information page 246. Ú lead to severe internal engine damage.

  • Page 214: Brake System

    SERVICING AND MAINTENANCE Disposal Of Used Coolant If an examination of your engine compartment shows no WARNING! evidence of radiator or hose leaks, the vehicle may be Used ethylene glycol-based coolant (antifreeze) is a safely driven. The vapor will soon dissipate. Riding the brakes can lead to brake failure and possibly regulated substance requiring proper disposal.

  • Page 215: Automatic Transmission

    SERVICING AND MAINTENANCE Fluid And Filter Changes CAUTION! WARNING! Under normal operating conditions, the fluid installed at Do not use chemical flushes in your transmission as the  To avoid contamination from foreign matter or mois- the factory will provide satisfactory lubrication for the life chemicals can damage your transmission components.

  • Page 216: Fuses

    SERVICING AND MAINTENANCE Underhood Fuses The fuses protect electrical systems against excessive USES current. The Power Distribution Center (PDC) is located in the General Information When a device does not work, you must check the fuse engine compartment near the battery. This center element inside the blade fuse for a break/melt.
  • Page 217 SERVICING AND MAINTENANCE Power Distribution Center Cavity Cartridge Fuse Blade Fuse Description * If Equipped – – Not Used – 25 Amp Clear Ignition Coil/Fuel Injector – – Not Used...
  • Page 218 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description * If Equipped – 25 Amp Clear Amplifier/Active Noise Control * – – Not Used – – Not Used – 5 Amp Tan Battery Sensor (IBS) – 10 Amp Red ECM (S)* –...
  • Page 219 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description * If Equipped – – Not Used – 15 Amp Blue Media HUB / PWR Lumbar * – – Not Used 20 Amp Blue – 30 Amp Pink – Power Liftgate * 25 Amp Clear –...
  • Page 220 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description * If Equipped 30 Amp Pink – Front Wiper 30 Amp Pink – Brake Vacuum Pump – – Not Used 40 Amp Green – ESP-ECU & Valves – 15 Amp Blue RF HUB/ KIN / ESL / DVD Front &...
  • Page 221 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description * If Equipped – 20 Amp Yellow Horn – 10 Amp Red Heated Mirrors * 30 Amp Pink – Rear Defroster (EBL) 20 Amp Blue – Trailer Tow Back-up Lights * –...
  • Page 222 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description * If Equipped – – Not Used Front Ventilated Seats / Heated Steering – 15 Amp Blue Wheel * – 5 Amp Tan Security Gateway – – Not Used 40 Amp Green –...

  • Page 223: Bulb Replacement

    SERVICING AND MAINTENANCE EPLACEMENT Replacement Bulbs, Names, And Part Numbers In the instance a bulb needs to be replaced, this section includes bulb description and replacement part numbers. Some of the inside bulbs are brass or glass-wedge base. Aluminum base bulbs are not approved. NOTE: See an authorized dealer for LED bulb replacement.
  • Page 224 SERVICING AND MAINTENANCE Exterior Bulbs Lamps Bulb Number Reflector Low Beam — H11LL Halogen Head Lamp Reflector High Beam — 9005LL Front Turn Signal Lamp PWY24WNA Front Side Marker Lamp Front Park Lamp PWY24WNA Center High Mounted Stop Lamp (CHMSL) LED (Serviced at an authorized dealer) Stop/Turn Signal Lamp W21/5WLL...
  • Page 225 SERVICING AND MAINTENANCE Replacing Exterior Bulbs Pull the bulb out of the socket and insert the replacement bulb. FRONT TURN SIGNAL LAMP Install the front turn signal lamp socket assembly into the housing, and rotate the front turn signal lamp See the following steps to replace: socket clockwise to lock it in place.

  • Page 226: Tires

    SERVICING AND MAINTENANCE TIRES  LT (Light Truck) — Metric tire sizing is based on US 1 — US DOT Safety Standards Code design standards. The size designation for LT-Metric tires is the same as for P-Metric tires except for the (TIN) AFETY NFORMATION...
  • Page 227 SERVICING AND MAINTENANCE TIRE SIZING CHART EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on US design standards, or "..blank.." = Passenger car tire based on European design standards, or LT = Light truck tire based on US design standards, or T or S = Temporary spare tire or 31 = Overall diameter in inches (in)
  • Page 228 SERVICING AND MAINTENANCE EXAMPLE: Service Description: 95 = Load Index  A numerical code associated with the maximum load a tire can carry H = Speed Symbol  A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions ...
  • Page 229 SERVICING AND MAINTENANCE Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
  • Page 230 SERVICING AND MAINTENANCE Tire Terminology And Definitions Term Definition B-pillar The vehicle B-pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a Cold Tire Inflation Pressure minimum of three hours.
  • Page 231 SERVICING AND MAINTENANCE Tire Loading And Tire Pressure This placard tells you important information about the: Number of people that can be carried in the vehicle. NOTE: The proper cold tire inflation pressure is listed on the Total weight your vehicle can carry. driver’s side B-pillar or the rear edge of the driver's side Tire size designed for your vehicle.
  • Page 232 SERVICING AND MAINTENANCE (4) The resulting figure equals the (6) If your vehicle will be towing a trailer, Steps For Determining Correct Load Limit— available amount of cargo and luggage load from your trailer will be transferred (1) Locate the statement “The combined load capacity.
  • Page 233 SERVICING AND MAINTENANCE WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them.

  • Page 234: Tires - General Information

    SERVICING AND MAINTENANCE — G Tire Inflation Pressures IRES ENERAL NFORMATION WARNING! The proper cold tire inflation pressure is listed on the Tire Pressure  Always drive with each tire inflated to the recom- driver's side B-pillar or rear edge of the driver's side door. mended cold tire inflation pressure.
  • Page 235 SERVICING AND MAINTENANCE Radial Ply Tires Run Flat Tires — If Equipped Example: If garage temperature = 68°F (20°C) and the outside temperature = 32°F (0°C) then the cold tire Run Flat tires allow you the capability to drive 50 miles inflation pressure should be increased by 3 psi (21 kPa), WARNING! (80 km) at 50 mph (80 km/h) after a rapid loss of inflation...
  • Page 236 SERVICING AND MAINTENANCE Tread Wear Indicators  Distance driven. It is recommended to replace the two front tires or two rear tires as a pair. Replacing just one tire can seriously affect  Performance tires, tires with a speed rating of V or Tread wear indicators are in the original equipment tires to your vehicle’s handling.

  • Page 237: Tire Types

    SERVICING AND MAINTENANCE — I PARE IRES QUIPPED CAUTION! WARNING! NOTE: Replacing original tires with tires of a different size may Do not use Summer tires in snow/ice conditions. You For vehicles equipped with Tire Service Kit instead of a result in false speedometer and odometer readings.
  • Page 238 SERVICING AND MAINTENANCE Compact Spare Tire — If Equipped Collapsible Spare Tire — If Equipped Full Size Spare — If Equipped The compact spare is for temporary emergency use only. The collapsible spare is for temporary emergency use only. The full size spare is for temporary emergency use only. You can identify if your vehicle is equipped with a compact You can identify if your vehicle is equipped with a This tire may look like the originally equipped tire on the...

  • Page 239: Wheel And Wheel Trim Care

    SERVICING AND MAINTENANCE When cleaning extremely dirty wheels including excessive Dark Vapor Chrome, Black Satin Chrome, or Low Gloss HEEL HEEL brake dust, care must be taken in the selection of tire and Clear Coat Wheels All wheels and wheel trim, especially aluminum and wheel cleaning chemicals and equipment to prevent CAUTION! chrome plated wheels, should be cleaned regularly using...

  • Page 240: Snow Traction Devices

    SERVICING AND MAINTENANCE RACTION EVICES Use of traction devices require sufficient tire-to-body clearance. Due to limited clearance, the following snow traction devices are recommended. Follow these recommendations to guard against damage:  Snow traction device must be of proper size for the tire, as recommended by the snow traction device manufacturer. ...

  • Page 241: Tire Rotation Recommendations

    SERVICING AND MAINTENANCE DEPARTMENT OF TRANSPORTATION their use, however, and may depart OTATION ECOMMENDATIONS significantly from the norm due to UNIFORM TIRE QUALITY GRADES The tires on the front and rear of your vehicle operate at variations in driving habits, service different loads and perform different steering, driving, and The following tire grading categories braking functions.

  • Page 242: Temperature Grades

    SERVICING AND MAINTENANCE BODYWORK EMPERATURE RADES WARNING! The Temperature grades are A (the The temperature grade for this tire is established for a ROTECTION TMOSPHERIC highest), B, and C, representing the tire's tire that is properly inflated and not overloaded. GENTS Excessive speed, underinflation, or excessive loading, resistance to the generation of heat and...

  • Page 243: Body And Underbody Maintenance

    SERVICING AND MAINTENANCE  If a lot of driving is done on gravel roads, consider mud NDERBODY AINTENANCE CAUTION! or stone shields behind each wheel. Cleaning Headlights  Use Mopar® Touch Up Paint on scratches as soon as  Do not use abrasive or strong cleaning materials possible.

  • Page 244: Plastic And Coated Parts

    SERVICING AND MAINTENANCE Cleaning Plastic Instrument Cluster NOTE: WARNING! If equipped with light colored leather, it tends to show any Lenses foreign material, dirt, and fabric dye transfer more so than A frayed or torn seat belt could rip apart in a collision The lenses in front of the instruments in this vehicle are darker colors.

  • Page 245: Technical Specifications

    TECHNICAL SPECIFICATIONS VEHICLE IDENTIFICATION NUMBER (VIN) BRAKE SYSTEM ORQUE PECIFICATIONS The VIN is on the left front corner of the instrument panel Your vehicle is equipped with dual hydraulic brake Lug Nut/Bolt **Lug Nut/Bolt Lug Nut/Bolt and is visible from outside of the vehicle through the systems.

  • Page 246: Fuel Requirements

    TECHNICAL SPECIFICATIONS FUEL REQUIREMENTS Tighten the lug nuts/bolts in a star pattern until each nut/ EFORMULATED ASOLINE bolt has been tightened twice. Ensure that the socket is fully engaged on the lug nut/bolt (do not insert it halfway). Many areas of the country require the use of cleaner While operating on gasoline with the required octane burning gasoline referred to as “reformulated gasoline”.

  • Page 247: Do Not Use E-85 In Non-Flex Fuel Vehicles

    TECHNICAL SPECIFICATIONS E-85 I ingredients. These can harm fuel system gasket and ETHYLCYCLOPENTADIENYL diaphragm materials. (MMT) I EHICLES ANGANESE RICARBONYL YSTEM AUTIONS ASOLINE Non-Flex Fuel Vehicles (FFV) are compatible with gasoline containing up to 15% ethanol (E-15). Use of gasoline with MMT is a manganese-containing metallic additive that is CAUTION! higher ethanol content may void the New Vehicle Limited...

  • Page 248: Fluid Capacities

    TECHNICAL SPECIFICATIONS FLUID CAPACITIES Metric Fuel (Approximate) 3.6L Engine 19 gal 71 L Engine Oil With Filter 3.6L Engine 5 qt 4.7 L Cooling System* 3.6L Engine 15 qt 14.2 L * Includes heater and coolant reservoir filled to MAX level. ENGINE FLUIDS AND LUBRICANTS Component Fluid, Lubricant, or Genuine Part...

  • Page 249: Chassis Fluids And Lubricants

    TECHNICAL SPECIFICATIONS CAUTION!  Mixing of engine coolant (antifreeze) other than specified Organic Additive Technology (OAT) engine coolant (antifreeze), may result in engine damage and may decrease corrosion protection. Organic Additive Technology (OAT) engine coolant is different and should not be mixed with Hybrid Organic Additive Technology (HOAT) engine coolant (antifreeze) or any “globally compatible”...

  • Page 250: Customer Assistance

    FOR YOUR VEHICLE Available 24 hours, 7 days a week. FCA US LLC and its authorized dealers are vitally interested in your satisfaction. We want you to be happy Call 1-800-521-2779 or visit chrysler.rsahelp.com(USA) with our products and services. REPARE PPOINTMENT Call 1-800-363-4869 or visit fca.roadsideaid.com...

  • Page 251: Fca Us Llc Customer Center

    If you are inconvenienced by a flat tire, we will dispatch a closest authorized Chrysler, Dodge, Jeep®, or Ram dealer. With your consent, we will contact local police or safety If you choose to go to another dealer, you will be service provider to use your vehicle’s temporary spare tire...

  • Page 252: Mexico

    CUSTOMER ASSISTANCE Canadian residents with hearing difficulties that require EXICO WARNING! assistance can use the special needs relay service offered Av. Prolongacion Paseo de la Reforma, 1240 by Bell Canada. For TTY teletypewriter users, dial 711 and Engine exhaust (internal combustion engines only), for Voice callers, dial 1-800-855-0511 to connect with a Sante Fe C.P.

  • Page 253: Reporting Safety Defects

    CUSTOMER ASSISTANCE REPORTING SAFETY DEFECTS PUBLICATION ORDER FORMS To contact NHTSA, you may call the Vehicle Safety Hotline toll free at To order the following manuals, you may use either the 50 U NITED TATES 1-888-327-4236 (TTY: website or the phone numbers listed below. , D.C.

  • Page 254: Change Of Ownership Or Address

    CUSTOMER ASSISTANCE Owner's Manuals Make sure to include the following: Le présent appareil est conforme aux CNR d`Innovation, Science and Economic Development applicables aux These Owner's Manuals have been prepared with the  Date of Sale (mm/dd/yy) appareils radio exempts de licence. L'exploitation est assistance of service and engineering specialists to ...
  • Page 255 INDEX Air Conditioning Filter ..........48 AUX Cord ................. 52 Air Conditioning, Operating Tips ........48 Auxiliary Electrical Outlet (Power Outlet) ...... 53 About Your Brakes ............243 Air Filter .................204 Axle Lubrication ............247 Adding Engine Coolant (Antifreeze) ......211 Air Pressure Additives, Fuel ..............
  • Page 256 Clean Air Gasoline ............244 Diagnostic System, Onboard ......... 73 Cleaning Dimmer Switch Camera ................92 Wheels ..............237 Headlight ..............38 Camera, Rear ..............92 Climate Control ............... 44 Dipsticks Capacities, Fluid............246 Manual ............... 44 Oil (Engine) .............. 202 Caps, Filler Rear................47 Disable Vehicle Towing ..........
  • Page 257 Engine ................201 Flashers Air Cleaner............... 204 Hazard Warning............176 Gas Cap (Fuel Filler Cap) ..........93 Block Heater ..............78 Turn Signals ........38 Gasoline, (Fuel) ............244 Break-In Recommendations ........78 Flash-To-Pass............38 Gasoline, Clean Air ............244 Checking Oil Level ..........202 Flat Tire Changing........
  • Page 258 Interior ............... 41 Lights On Reminder ........... 38 Ignition ................12 Lane Change And Turn Signals........38 Malfunction Indicator (Check Engine) ..... 71 Switch .................12 Lane Change Assist ..........38 Park................72 Inside Rearview Mirror.......... 37 Lap/Shoulder Belts ............140 Passing ............... 38 Instrument Cluster ...........60 Latches................175 Reading..............
  • Page 259 Manual Oil, Engine ............203 Power Seats Park Release............194 Capacity ..............246 Down ................33 Service..............251 Checking ..............202 Forward..............33 Map/Reading Lights ............41 Dipstick ..............202 Rearward ..............33 Marker Lights, Side............223 Disposal ..............204 Up................33 Media Hub ...............52 Filter ...............
  • Page 260 Remote Keyless Entry Seat Belts ............140 Seats ..............22 Arm The Alarm............16 Adjustable Shoulder Belt ........142 Adjustment ..........22 Disarm The Alarm ............16 Adjustable Upper Shoulder Anchorage....142 Heated ............... 34 Programming Additional Key Fobs ......11 Adjustable Upper Shoulder Belt Anchorage ..142 Power .................
  • Page 261 Spare Tire Stowage............185 Storage ................49 Tires........... 175 Spare Tires ..........180 Stow ‘n Go (Fold In Floor) Seats ........29 Aging (Life Of Tires) ..........234 Specifications Stuck, Freeing ...............195 Air Pressure ............. 232 Oil................246 Sunglasses Storage............49 Chains ..............238 Speed Control Supplemental Restraint System –...
  • Page 262 To Open Hood..............56 Transporting Pets ............173 Tongue Weight/Trailer Weight ........99 Tread Wear Indicators ..........234 Warning Lights (Instrument Cluster Descriptions) ..70 Towing................95 Turn Signals ............38 Warning Lights And Messages ........68 Disabled Vehicle ............. 196 Warranty Information ........... 250 Guide ................97 Washers, Windshield ...........
  • Page 263 It is always the driver’s responsibility to comply with all local laws. This Owner’s Manual has been prepared to help you get acquainted with your new Chrysler brand vehicle and to provide a convenient reference source for common questions.
  • Page 264 ©2022 FCA US LLC. All Rights Reserved. Tous droits réservés. Chrysler is a registered trademark of FCA US LLC or FCA Canada Inc., used under license. Chrysler est une marque First Edition déposée de FCA US LLC ou FCA Canada Inc., utilisée sous le permis. App Store is a registered trademark of Apple Inc. Google Play Store is a registered trademark of Google.

Table of Contents