Chrysler Conquest 1988 Service Manual page 776

Z-10
FRONT SUSPENSION
- Front Axle Hub w
INSPECTION
f&I;;.
NOZKCAB z=
l
Check the 911 seals for crack and damage.
:
B&L ;
@ Check the beannss tor seizure,
dtscolouratt~on and .__ .z-'
==.i
-e -i
roughened racewav surtace.
e Check th.e front axle hub tor cracks.
SERViCE POINTS OF INSTALLATION
l
ADJUSTMENT OF WHEEL BEARING
Tighten the nut by the following procedure.
(1)
Tighten to 20 Nrn- (14 ft.1b.s.)
I
I
(2)
Loosen to 0 Nm-m (0 ft.lbs.1
1
(3) I---
Retighten to 5 Nr% (4 ft.lbs.)
4. INSTALLATION OF LOCK CAP
NOZKDAC
Install the lock-cap and cotter pin. If the posltlon ot the
ccjtter prn IS rrot matched wrth the holes ot the lock cap,
reposItron the lock cap so that the holes align. It this cannot
be accomplished, back otf the nut not more tha.n 15". Align
lock cap and Install cotter pin.