Chrysler Conquest 1988 Service Manual page 994

.-A .__-
11-12
INTAKE AND EXHAUST SYSTEM
- Turbocharger
INOOOE
51N000:
(5) Connect a haGid vacuum fGrnp-t?o the nipple to which the
=
white striped vacuum ho&e has been connect-&.
(6) Apply the battery voltage to the solenoid valve terminals to -_
create negative pressure, and check air tightness~when the I
nipple to which the yellow striped hose has been con-
netted is' both open and closed.
(7) Measure the solenoid valve terminal resistance~r~
Standard value: 36 - 44 II [at 20°C (68"F)]
J
SERVICE POINTS OF iNSTALLATlON
NllLDAB
12. INSTALLATION OF OIL PIPE
Before installing the flare nut on the oil pipe turbocharger
side, pour a small amount of engine oil ins the oil path.
10. INSTALLATION OF CATALYTIC CONVERTER
When installing the catalytic converter or exhaust fitting,
tighten temporarily the turbocharger side first and-then the
exhaust pipe side. Then, tighten to specified torque.