Chrysler Conquest 1988 Service Manual page 1155

MANUAL TRANSMISSION
- Extension Housing Cover
21-31
EXTENSION HOUSING COVER
DISASSEMBLY AND REASSEMBLY
Disassembly steps
1. Nut (2)
2. Spring washer (2)
** 3. Stopper bracket
l
+ 4. Special bolt (2)
5. Extension housing cover
NPIZE- .
NOTE
(1) Reverse the disassembly procedures to reassemble.
(2) I)*: Refer to "Service Points of Reassembly".
11-15 ftlbs.
132013
resistance plate
3
SERVICE POINTS OF REASSEMBLY
NSlZHAA
4. INSTALLATION OF SPECIAL BOLT
Apply recommended sealant to two special bolts (except
threaded portions) and install them to cover. Do not wipe
away excess sealant from cover.
Recommended sealant: 3M Liquid Gasket 8959 or
equivalent
3. INSTALLATION OF STOPPER BRACKET
(1) When installing the stopper bracket, apply recom-
mended sealant to threads of special bolts and torque
nuts.
Recommended sealant: 3M Liquid Gasket 8959 or
equivalent
(2) Check to ensure that reverse resistance plate moves
smoothly in directions A and B shown in the illustration
and is brought back by return spring.