Cylinder Head; Engine Adjustment; Engine Oil~Filter Replacement; Engine Oil Inspection - Chrysler Conquest 1988 Service Manual

___-
____
ENGINE
- Engine Adjustment
ENGINE ADJUSTMENT
NOSFAAAa
\
5EN06E
@ Timirig belt side
5ENOlE
ENGINE OIL INSPECTION
(1) Check that the engine oil level is within the range shown on ~_
the dipstick. _ ~~
(2) Check that the engine oil is not excessively conGminated ~z
and is free from engine coolant or gasoline. Also check that :
it has appropriate viscostiy.
_i
ENGINE 01~ REPLACEMENT
-z
NOSFBAAa
Refer to GROUP Q LUBRICATION AND MAINTENANCE - z
Marntenance Service.
ENGINE OIL FILTER REPLACEMENT
NOSFCAAa
Refer to GROUPS -LUBKlCATlON AND MALNTENANCE .. -~
Maintenance Servrce.
:
RETORQUING CYLINDER HEAD BOLTS
NOSFDAB
(1) Using torque wrench. first slightly loosen cylinder head ~~
bolts and thentighten to specified torque.
Tightening torque:
Cylinder head bolt (No. 1 to IO)
Cold engine
90 - 100 Nm (65 - 72
t=t.lbs.
Hot engine 100 - 110 Nm (73 - 79 ftlbs.
Cylinder head bolt (No. 11)
Cold
engine
15-22Nm (II-15ft.lbs.
Hot engine
15-22Nm(ll-15fklbs.
(2) Be sure to-follovv the specific torquing sequence.
NOTE
-
Run engine until normal operating temperature is reached, I
allow it to cool down, and then retorque bolts to specifica- 1
tion for best results.
VALVE CLEARANCE AbJlJ&MENT
-
NOSFEAAa
Refer to GROUP 0 LUBRICATION AND MAINTENANCE -_~~
Maintenance Se~rvice. :