Service Specifications - Chrysler Conquest 1988 Service Manual

FUEL (ECI) SYSTEM
- Specifications
14-23
SERVICE SPECIFICATIONS
N14CB-A
Items Specifications
Engine
BasidicjnitiZn timing
IO" f 2"BTDC at curb idle
Actual ignition timing at high altitude
15"BTDC at curb idle
Curb idle speed
rpm
850 & 100
Idle speed when air conditioner is on
rpm
1,000 at neutral position
750 at D range
(Vehicles with automatic transmission)
Idle speed control (ISC) setting
rpm
850
Throttle position sensor (TPS) regulating voltage V 0.48 - 0.52 at curb idle
Injection mixer
Injector coil resistance Q
Blue connector [at 20°C (68"F)]
2-3
Gray connector [at 20°C (68"F)] 2-3
Throttle position sensor (TPS) resistance kQ
3.5-6.5
Motor position sensor (MPS) output voltage V Approx. 0.5 - 5
ISC servo motor coil resistance [at 20°C (68"F)] R 5-35
Input sensor
Intake air temperature sensor resistance
[at 20°C (68"F)l kfl 2.7
Engine coolant temperature sensor resistance kR
20°C (68°F) 2.5
80°C (176°F)
0.3
Oxygen senior output voltage V Approx. 1
Air flow sensor output voltage V 2.2 - 3.2
. Barometric pressure sensor output voltage V
101 kPa (14.7 psi) 4
88 kPa (12.8 psi) 3.5
Output actuator
EGR control solenoid valve resistance [at 20°C (68"F)] IR 36-44 *
Secondary air control solenoid valve resistance
[at 20°C (68"F)l fi 36-44
Waste gate solenoid valve resistance [at 20°C (68"F)] R 36-44