Chrysler Conquest 1988 Service Manual page 1032

=-xc, _= ~_~_E
__-
REAR AXLE - Troubleshooting
Loose filler or drain plug
Retighten or apply adhesive
Seizure
Clogged or damaged vent plug
Excessive drive pinion preload
Excessive side bearing preload
Improper differential gear backlash
Excessive clutch plate preload
Clean or replace
Adjust
Contaminated gear oil Replace
.._ I-
Insufficient gear oil quantity
Refill
L
NOTE ~.
In the event of seizure, disassemble and replace the parts involved, and also be sure to check all components for
any irregularities and repair or replace as necessary.
Breakdown incorrect final drive gear backlash
Incorrect drive pinion preload
Incorrect side bearing preload
Excessive differential gear backlash
Insufficient clutch plate preload
Adjust
Loose drive gear clamping bolts
Operational malfunction due to overloaded'~~
clutch
Retighten
'
.r
Avoid excessively rough operation
In addition to drsassembling and replacing the failed parts, be sure to check all components for irregularities and
repair or replace as necessary.
~- The limited slip The limited slip device 1s damaged
Drsassemble, check the functioning,
differential does not
and replace the damaged parts
function (on snow,
mud, ice, etc.)