Chrysler Conquest 1988 Service Manual page 1200

21-78
AUTQMATIC TRANSMISSION - Transmission Control
\ 1 \ '
J
\ \
\
09Ylli
Terminal
08YllE
,
SERVICE POINTS OF REMOVAL
N211BAD
NOTE
_
Before servicing-be sure to-set the selector lever to "N" =,
position, and then ~disconnect the lever and rpd from the i_
cross-shaft.
-~
8. REMOVAL OF SELECTOR KNOB / 9. SELECTOR LEVER
COVER
(1) Remove--then front co&ole box.
(2) Push down the selector lever cover.-:
(3) Remove the. selector.iknob. from the selectar lever. .:I
11. REMOVAL OF SELECTOR LEVER / 27. BRACKET
(1) Disconnect the connector of indicator illumingion light. __
(2) Remove tK e selector lever and bracket.
(3) Remove the split pinsin order to disconnectihe lever :I
from bracket.
INSPECTION
N2llCAD
l
Check the detent plate for wear.
e Check the pin eat the end of selector lever for wear.
l
Check the contact surfams of push button and adjusting _
cam for wear.
l
With the 00 switch turned on, check for continuity across ;
the terminals.
l
Check the 0.D. switch harness for continuity.
-