Chrysler Conquest 1988 Service Manual page 1196

~--~__
AUTOMATIC TRANSMISSION
- On-vehicle Service
JATOJL
JAT03E
KICKDOWN SWITCH ADJUSTMENT
The kickdown switch is located at the upper post of the
accelerator pedal, inside the car.
When the pedal is fully depressed, a click can be he&d just
before the pedal bott-oms out.3 the click is not heard, loosen ~-
the lock nut and extend the switch until the pedal lever makes
TI
contact with the~switch and-the switch clicks. _
Do not allow the switch~to make contact too soon. Thjs would
cause the transmission to dqwnshift on part throttle.
.z
.;
DIAGNOSIS
Switch can be heard clicking,and the transmissionstill does
=
not ktckdown: - ~~
Check the contrnurty of the switch usrng a continuity tester, -
Also check for available current.
The car upshrfts at approximately 60 and 100 km/h (36 and 60 =z
MPH) only:
The kickdown switch may be rnternally shorted. (When the ~_
swatch IS shorted, there is contrnurty through the swrtch In any
position).
O.D. CANCEL SOLENOID
LOCATION
The O.D. cancel solenoid is located on left side of transmission. ~
INSPECTION
Confirm that clicking sound is heard when power is applied.