Chrysler Conquest 1988 Service Manual page 1057

REAR AXLE
- Differential Carrier
3-39
16. REMOVAL OF DRIVE PINION REAR BEARING INNER
RACE
Pull out the drive pinion rear bearing inner race by using the
special tools.
17. REMOVAL OF OIL SEAL / 19. DRIVE PINION FRONT
BEARING OUTER RACE / 20. DRIVE PINION REAR
BEARING OUTER RACE
Drive out the oil seal, drive pinion front and rear bearing
outer races from the gear carrier by using a bar.
INSPECTION
NOBIMBA
Wash the disassembled parts in cleaning solvent, dry them
using compressed air, and then check the following areas:
l
Check companion flange for wear or damage.
l
Check oil seal for wear or deterioration.
l
Check bearings for wear or discoloration.
l
Check gear carrier for cracks.
l
Check drive pinion and ring gear for wear or cracks.