Chrysler Conquest 1988 Service Manual page 1087

REAR SUSPENSION
- Rear Crossmember
17-19
INSPECTION
N17LCAA
l
Check the crossmember for cracks, deflection and damage.
l
Check the rear support insulators for cracks and peeling.
l
Check the rear support for deformation and damage.
SERVICE POINTS OF INSTALLATION
N17LDAB
7. INSTALLATION OF REAR SUPPORT
(1) Align the positions of the projections of the rear
supports to the determining holes of the d.ifferential
carrier, and then mount the rear supports to the
differential carrier.
(2) Temporarily mount the rear support insulators~ to the
rear supports.
5. INSTALLATION OF REAR SUPPORT INSULATOR
(1) Align the rear support insulators to the crossmember
mounting holes, and then, while slanting the differential
carrier, mount it to the crossmember.
(2) Align the positions of the projections of th.e rear support
insulators to the determining holes of the rear supports,
and then tighten the mounting nuts of the rear support
insulators.
1. INSTALLATION OF LOWER CONTROL ARM
Refer to P.17-9