Chrysler Conquest 1988 Service Manual page 1242

AUTOMATIC TRANSMISSION - Control Valve Body
CONTROL VALVE BODY
NzlLO- .
JATllC 5
The valve body contarns many precrsron parts and requrres
extreme care when parts are removed and serviced. Place I
removed parts on a parts rack so they can be put back in the -r
valve body in the.same posrtrons and sequences. Care will also -1
prevent springs and small parts from becoming scattered or ;
lost.
DISASSEMBLY
1. Remove oil strainer and-.its attaching screws, nuts and ~~-
bolts.
2. Disassemble valve body and tts remarnrng attachrng bolts 5
and nuts to carefully separate lower body, separator plate
and upper body.
3. During valve body separation,-do not scatter or lose orifice
check valve,- servo orificecheck valve, throttle relief check .~
valve (ball) and related springs.