Chrysler Conquest 1988 Service Manual page 1154

21-30
MANUAL TRANSMISSION - Gearshift Lever Assembly
GEARSHIFT LEVER ASSEMBLY
NIlYE-.
DISASSEMBLY AND REASSEMBLY
Disassembly steps
1.
Gearshift lever
2. Lever bushing
3. Gasket
4, Stopper plate
NOTE
(I 1 Reverse the disassembly procedures to reassemble.
(2)
q
: Non-reusable parts
I 1-15 ftlbs.
Control lever
Control lever cover
L
cover
-Lever bushing
11004*
INSPECTION
NZIYGAA
l
Check for play between control lever andcontrol lever "E". i
If play is evident, replace- lever assembly.
@ Push control lever in and-check to ensure that it moves -1.
smoothly up and down.
l
Check cover for damage and replace if necessary. To
remove cover; cut away with knife. To install new cover, _
-~~
first apply thincoat of oil tb periphery of control lever "B".
Then install by sliding it down from top of lever "6".
@ Check lever bushing for wear and replace ~if necessary.
-