Chrysler Conquest 1988 Service Manual page 1076

REAR SUSPENSION
- Suspension Assembly
SERVICE POINTS OF REMOVAL
1. REMOVAL OF PROPELLER SHAFT
Refer to GROUP 16 PROPELLER SHAFT AND UNIVERSAL
JOINTS - Propeller Shaft.
9. REM&AL OF SUSPENSION ASSEMBLY
(1) Support the vehicle with rigid racks at the specified
points, and remove the rear wheels.
NOTE
The height of the rigidracks should be 600 mm (24 in.)
or more. -
(2) Secure the strut assfibly to the crossmember with
rope.
(3) Lower the jack slowly, being sure to support both of the
left and right lower control arms and the strut assem-
blies.
SERVICE POINTS OF INSTALLATION
6. INSTALLATION OF STRUT ASSEMBLY
Refer to P.17z121
* PARKING BRAKE ADJUSTMENT
Refer to GROlJP 5 BRAKE - Service Adjustment Proce-
dures.
3. INSTALLATION OF MAIN MUFFLER / 2. CENTER EX-
HAUST PIPE
Refer to GROUP 11 INTAKE AND EXHAlJST SCTEM -
Exhaust Pipes and Mufflers.
1. INSTALLATION OF PROPELLER SHAFT
Refer to GROUPS 16 PROPELLER SHAFT AND LJNIVERSAL
JOINTS - Pmpeller~ Shaft: