Chrysler Conquest 1988 Service Manual page 1134

21-8
MANUAL TRANSMISSION -
Service Adjustment
Procedures
Oil level ---
-- - -
---
----
SERVICE ADJUSTMENT PROCEDURES
N21FCAAa
TRANSMISSION FLUID REPLACEMENT
(1) Position vehicle on a flat level and rem~ove drain-plug to -_
drain transmission oil.
(2) Replace packing with a new one and tighten the drG;ain plug.
11
- --
_
(3) Pour in freshtransmrssron~pil through filler plug hole until rt- --
reaches the bottom of finer port.
;+
Specified transmission oil:
MOPAR Hypoid Gear Oil Part No. 3744994 or
equivalent
Quantity: 2.3 lit. (2.4 qts.)
TRANSMISSION FLUID INSPECTION
NZlFBAAa
Reter to GROUP Q LUBRIC;ATION AND MAINTENANCE - ~~
Manual Transm%Sion.
SPEEDOMETER CABLE REPLACEMENT
NZlFEAAa
(1) Replace the cable -assembly if there is a malfunction.
(2) When connecting the cable to the meter, insert the cable -y
until its stopper properly fits to the meterside groove.
-_
- -
(3) After installing the speedometer, pull the sp-eedometer --
cable through the grommet in the toeboard~untifthe-cable -L
marking is v$ible from the engine compartment srde.
Caution
Poor installation of the cable may cause a fluctuating
meter pointer, or noise and a damaged harness inside
the instrument panel.