Chrysler Conquest 1988 Service Manual page 1241

AUTOMATIC TRANSMISSION -
Planetary Carrier / Connecting Drum Assembly
21-119
-IF--- Clearance
I
- _-
JATl13
Connecting drum
IATnnl5
reward front
JAT115
PLANETARY CARRIER
NPlLX-
-
The planetary carrier cannot be divided into its individual
components.
If any part of the component is faulty, replace the carrier as an
unit.
1. Check clearance between pinion washer and planetary
carrier with a feeler.
Standard value: 0.20 - 0.70
mm (.0079 - .0276 in.)
Replace if the clearance exceeds 0.80 mm (.0315 in.).
2. Check planetary gear sets for damaged or worn gears.
Gear sets that have been damaged by overheating will have
a blue discoloration.
CONNECTING DRUMASSEMBLY
NPILY- _
If one-way clutch is out of order as determined during
disassembly, repair it as follows:
1. Remove the snap rings inner and outer races.
2. Inspect one-way sprag and contacting surface for wear or
burns.
Replace parts as necessary.
3. Assemble those parts.
Install one-way clutch so that the arrow mark I'+" is
toward front of vehicle. It should be free to rotate only in
clockwise direction.