Chrysler Conquest 1988 Service Manual page 278

8-26
WIRING HARNESS - How To Read Wiring Diagrams
-
(4) Indication oft-fuses, fusible ltnks and centralized relays
The fuses and fusible links in a circuit diagram are rndicated by a wave symbol and a double wave symbol,
respectively. At a centralized junction, the fuses are given fuse numbers and centralized relays are given
connector symbols.
Example of centralized junction symbol: A - 01 X
-
-L--
Centralized junction indication symbol
_1_- ~~~
Connector's unique number (serial number)
Connector svmbol
(5) Indication of ground point
The ground point in a circuit diagram is marked by a GND symbol, making- it possible for you to refer to a
wiring harness configuration diagram and to ELECTRICAL SYSTEM P&RTS LOCATION (GrouFding).
(6) Indication of wires
In a circuit diagram, the wire diameter and wire color are shown for each wire. If there are several wires of
the same color In a connector, their wire color indication symbols should be such symbols as ai<.1 and .*2
for identification.
On connectors like this one given a
centralized -junction identification
symbol (X), refer to CENTRALIZED
JUNCTION for connector shape,
etc-
I.
E-68a B-LX@
Fusible
The connector E-39 has two wires
identical in color (RL), so they are
given identification symbols -8.1 and
e8.2 in order to distinguish them.