Chrysler Conquest 1988 Service Manual page 1107

STEERING
- Power Steering Gear Box
19-21
POWER STEERING GEAR BOX
NlSNA- -
REMOVAL AND INSTALLATION
Pre-removal Operation
l
Draining Power Steering Fluid
(Refer to P-1 9-l 1)
Post-installation Operation
l
Refilling Power Steering Fluid
1
l
Bleeding Gear Box and Pipe Lanes
(Referto P.l9-II)
20-25 Nm
14-18 ft.lbs.
40-50 Nm
29-38
ft.lbs.
30-40 Nm
22-29 ft.lbs.
35-45 Nm
25-33 ft.lbs.
Removal steps
4+
I. Pressure hose connection
4+
2. Return hose connection
3. Cotter pin
4+
4.
Relay
rod
connection
5. Gear box assembly
NOTE
(1) Reverse the removal procedures to reinstall.
(2) 4W: Refer to "Service Points of Removal"
(3)
q
: Non-reusable parks
SERVICE POINTS OF REMOVAL
NlSNBAD
1. DISCONNECTION OF PRESSURE HOSE / 2. RETURN
HOSE
Disconnect the pressure hose and return hose from the
gear box.
Caution
Use pieces of cloth to close the end of each hose in
order to prevent escape of fluid and entrance of dirt and
other foreign material.