Chrysler Conquest 1988 Service Manual page 1239

AUTOMATIC TRANSMISSION
- Governor
21-117
Tightening torque:
JATl OS
---I cI- Wire dia.
JATl 1 I
I
GOVEiRNOR
N21 LM- -
DISASSEMBLY
1. Remove governor body from oil distributor.
2. Disassemble governor and check valves for indication of
burns or scratches. Inspect springs for weakness or
distortion. Replace parts as necessary and reassemble.
Do not interchange components of primary and secondary
governor valves.
REASSEMBLY
Reassemble governor, noting the following.
1. For identification of primary and secondary governor valve
springs, refer to the following chat-t.
Governor Spring Chart
Primary governor
Secondary
governor
Wire dia.
mm (in.)
0.45
LO1 77)
0.70
(.0276)
Outer
coil dia.
mm (in.)
8.75
(.3445)
9.20
(.3622)
No. of
Frrrn lyr,y,'h
Installed
active coil
Length Load
mm (in.) N (Ibs.)
5.0 21.8~ 7.5 2.109
(.858) (.295) (0.474)
5.5 19.9 10.5 6.86
(.783) (.413) (1.54)