Chrysler Conquest 1988 Service Manual page 1125

STEERING
- Steering Linkage
19-39
REPLACEMENT OF IDLER ARM BEARING
NISVJAA
1. Apply a thin coat of specified grease to the inner surfaces of
the idler arm, outer surfaces of the bearings and lips of oil
seals.
Specified grease: MOPAR Multi-mileage Lubricant Part
No. 2525035 or equivalent
2. Install the bearings and oil seals to the idler arm.
3. Install the idler arm assembly to the idler arm support.
i @k-i
13Y87(
13Y86:
-
REPLACEMENT OF DUST COVER
NlSVEAC
1. Remove the dust cover and O-ring from the ball joint.
'2. When installing the dust cover, fill the cover lip and the
interior with the specified grease.
Specified grease: MOPAR Multi-mileage Lubricant Part
No. 2525035 or equivalent
MEASUREMENT OF IDLER ARM STARTING TORQUE
Measure the starting torque of the idler arm with a spring
balance.
Standard value: 300 - 900 Ncm (26 - 78 in.lbs.)
Spring scale reading
26 - 78 N (6 - 18 Ibs.)