Chrysler Conquest 1988 Service Manual page 439

LIGHTING SYSTEM
- Troubleshootina
8-I 89
OPERATION
NOSIHHA
TROUBLESHOOTING HINTS
Battery voltage is always applied to the stop
light switch through fuse No. 2.
When the brake pedal is depressed for braking,
the stop light switch contacts are closed so that
current flows through fuse No. 2, stop light
switch, hazard warning light switch, turn signal
light switch, stop lights, and ground, causing the
stop lights to go on.
1. One stop light does not light
l
Check bulb.
2. Stop lights fail tom go off
l
Check stop light switch.