Chrysler Conquest 1988 Service Manual page 623

AUTOMATIC SPEED CONTROL (ASC) SYSTEM
- Outline
Input check mode
Code
No.
Input signal condition Display patterns,
21 SET switch ON signal received.
(Example) Code No. 23
22 RESUME switch ON signal received.
23 Cancel switch ON signal received.
F 3 flql+2q5&jc 3?
(Stop light switch ON, clutch switch or inhibitor
switch ON)
24 Vehicle speed 40 km/h (25 mph) or higher signal
received.
Ix x, A r '
25 Vehicle speed less than 40 km/h (25 mph) signal
0
received.
I Pause time: 3 seconds OFF
8
2
"Tens" rank signal:
1.5 second ON, 0.5 second OFF;
then 1.5 second ON (called "20")
3
Rank division: 2 seconds OFF 8
4
"Units" rank signal:
0.5 second ON, 0.5 second OFF signal
t;lh;sn;lmber of ON periods is the number of "unit"
03R0197