Chrysler Conquest 1988 Service Manual page 1226

d .-__---v- ~_____ __~~__ __--
-fK
,;-z
21-q
04
AUTOMATIC TRANSMISSION - Automatic Transmission Assembly
P
e
=-
,.l
/ ,--- I__
!.I!,
42. Before installing oil pan, check alignment and operation of
control leverymd~parking paw1 engagement. Blow mecha- -
nism with air to clean. Make fina! check to be sure-all bolts -1
are installed fin valve body.
~_ -
43. Install oil pan with new gasket.
Oil pan bolt: 5 - 7 Nm (3.6 - 5.1 ft.lbs.1
44. Install governor -tube.
Carefully inspect torque converter for damage. Check =
converter hub for grooves caused by hardened seals. Also
check bushing contact ajea.
-.
Lubricate ails pump lip seal and converter neck before ,_
installing converter.
Install converter, being sure that converter is- properly
meshed with oil pump drive gear.