Chrysler Conquest 1988 Service Manual page 433

LIGHTING SYSTEM
- Troubleshooting
8-183
OPERATION
Dome Light
NOBIHEC
l
Battery voltage is always applied to the dome
light through fuse No. 1.
l
When the dome light switch is set at "ON",
current flows through fuse No. 1, dome light,
and ground, causing the dome light to go on.
For the ~operation of the delayed switch-off dome
light, refer to the "ETACS" section.
Door-Ajar Warning Light
l
Battery voltage is always applied to the door-ajar
warning light through fuse No. 1.
l
Once any door is opened or remains ajar, the
door switch contacts close causing current to
flow through fuse No. 1, door-ajar warning light,
door switch, and ground so the door-ajar warn-
ing light goes on.
TROUBLESHOOTING HINTS
Dome light does not come on
1) Clock also does not operate
l
Check fuse.
2) Dome light does not come on even when door is
opened with dome light switch at "DOOR"
position
l
Check bulb
For the operation of the delayed switch-off domes
light, refer to the "ETACS" section.