Chrysler Conquest 1988 Service Manual page 1145

c
MANUAL TRANSMISSION
- Transmission
21-19
Spacer
SERVICE POINTS OF REASSEMBLY
67. INSTALLATION OF MAIN DRIVE GEAR BEARING
Use the special tool to install the main drive gear bearing.
-_- ._.. -.- _______
____- _... ~~__
66. INSTALLATION OF SNAP RING
Install the snap ring with snap ring pliers.~
-63. INSTALLATION OF OIL SEAL
Apply transmission oil to oil seal lip, and install the oil seal to
the front bearing retainer using the special tool.
62. INSTALLATION OF SPACER / 61. FRONT BEARING
RETAINER
.~ ~~
Select spacer to adjust clearance (C) to the standard value
before installing the front bearing retainer.
I_;r~
Standard value: 0 - 0.1 mm (0 - -004 in.)
;
1'
59. INSTALLATION OF SPACER
(1) Hold down counter gear and bearing outer race (in the
direction of arrow shown in the illustration).
_
x