Chrysler Conquest 1988 Service Manual page 1054

3-36 REAR AXLE
- Differential Carrier
1
.
t
1
t
-
Standard tooth contact pattern
1 Toe
2 Drive-side
3 Heel
4 Coast-side
Problem
Tooth contact patter-n
resulting from exces-
sive pinion height
The drive pinion is positioned too far from the center of
:he drive gear.
increase the thickness of the pinion height adjusting
shim, and position the drive pinion closer to thecenter
of the drive gear.
Also, for backlash adjustment, position the drive gear
farther from the drive pinion.
:ient pinion height
-he drive pinion is positioned too close to the center of
he drive gear.
Decrease the thickness of the pinion height adjusting
shim, and position the drive pinion farther from the
center of the drive gear.
Also, for backlash adjustment, position the dFive gear
closer-to the drive pinion.
.
11
S642