Chrysler Conquest 1988 Service Manual page 1137

MANUAL TRANSMISSION
- Transmission
21-11
SERVICE POINTS OF REMOVAL
NSlMBAD
1. REMOVAL OF GEARSHIFT LEVER ASSEMBLY
Refer to P.21-9.
2. REMOVAL OF PROPELLER SHAFT
(1) Make the mating marks on the flange yoke and the
differential companion flange.
(2) Pull out the propeller shaft from the transmission.
Caution
Use care not to damage the lip of transmission oil
seal.
Do not allow foreign matter to enter the transmis-
sion.
3. DISCONNECTION OF BACK-UP LAMP HARNESS CON-
NECTOR / 4. SPEEDOMETER CABLE
Disconnect the speedometer cable and the back-up lamp
switch harness. ,
5. REMOVAL OF CLUTCH RELEASE CYLINDER
Remove the release cylinder attaching bolts and slide the
release cylinder sideway.
6. REMOVAL OF BELL HOUSING COVER
Remove the bell housing cover.
lW
\u-u/ -
I
\ I
FO9004
7. REMOVAL OF STARTING MOTOR
Remove the starting motor.
f