Port-Based Vlan Configuration Commands; Display Port; Port - 3Com 5500-EI PWR Reference Manual

Example
# Enter VLAN 1 view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] vlan 1
[Sysname-vlan1]
# Remove VLAN 5.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] undo vlan 5

Port-Based VLAN Configuration Commands

display port

Syntax
display port { hybrid | trunk }
View
Any view
Parameters
hybrid: Displays hybrid ports.
trunk: Displays trunk ports.
Description
Use the display port command to display the existing hybrid or trunk ports, if any.
Examples
# Display the existing hybrid ports.
<Sysname> display port hybrid
The following hybrid ports exist:
GigabitEthernet1/0/1
The above information shows the current system has two hybrid ports: GigabitEthernet 1/0/1 and
GigabitEthernet 1/0/2.

port

Syntax
port interface-list
undo port interface-list
View
VLAN view
GigabitEthernet1/0/2
1-7