Network Prefix; Display Network Prefix - 3Com CoreBuilder 9000 User Manual

Network Prefix

Display Network
Prefix
You can display and configure the network prefix.

Display Network Prefix

Update Network Prefix


Reset Network Prefix Configuration
For more information about the use of Network Prefix, see "Hierarchic
ATM Addressing" on page 336.
Display the Network Prefix of the CoreBuilder 9000 ATM Enterprise
Switch.
Command Actions
Enter the menu sequence: (1) SYS: Platform Configuration
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 6 1
The following information is displayed
:
Current Switch Network Prefix:
47.0.0.0.0.0.3c.0.0.a0.0.0.0
The number of significant digits in the Switch Network
(1) SET: Switch Setup
(6) SNP: Switch Network Prefix Setup
(1) GET: Get Network Prefix
1 1 6 1
The network prefix of the CoreBuilder 9000 ATM
Enterprise Switch is displayed.
Information is displayed as shown in the example.
Network Prefix 149