Error message
found at '^' position.
Command Edit
The CLI provides basic command edit functions and supports multi-line editing. The maximum number
of characters a command can contain is 254. Table 5-3 lists the CLI edit operations.
Table 5-3 Edit operations
Press...
A common key
The Backspace key
The left arrow key or
<Ctrl+B>
The right arrow key or
<Ctrl+F>
The up arrow key or
<Ctrl+P>
The down arrow key or
<Ctrl+N>
The Tab key
CLI Configuration
display ip
Syntax
display ip
View
User view
Parameter
None
Description
Use the display ip command to display the IP address information about the switch.
An error is found at '^' position.
If the command does not reach 254 characters, insert the character at
the current cursor position and move the cursor one character to the
right.
Delete the character on the left of the cursor and move the cursor one
character to the left.
Move the cursor one character to the left.
Move the cursor one character to the right.
Access history commands.
Utilize the partial online help. That is, when you enter an incomplete
keyword and the Tab key, if the entered keyword uniquely identifies an
existing keyword, the system completes the keyword and displays the
command on the next line; if the input keyword matches more than one
keyword, the keywords are displayed in a new line in turn each time
you press Tab key; if the input keyword matches no keyword, the
system displays your original input on a new line without any change.
5-4
Description
To...