Lacp Enable; Lacp Port-Priority - 3Com 5500-EI PWR Reference Manual

Parameters
None
Description
Use the display lacp system-id command to display the device ID of the local system, including the
system priority and the MAC address.
Examples
# Display the device ID of the local system.
<Sysname> display lacp system-id
Actor System ID: 0x8000, 000f-e20f-0100
The value of the Actor System ID field is the device ID.

lacp enable

Syntax
lacp enable
undo lacp enable
View
Ethernet port view
Parameters
None
Description
Use the lacp enable command to enable LACP on the current port.
Use the undo lacp enable command to disable LACP.
By default, LACP is disabled on a port.
Examples
# Enable the LACP protocol on Ethernet 1/0/1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet1/0/1
[Sysname-Ethernet1/0/1] lacp enable

lacp port-priority

Syntax
lacp port-priority port-priority
undo lacp port-priority
View
Ethernet port view
1-5