Lacp Enable; Lacp Port-Priority - 3Com 8807 Command Reference Manual

Table 23 Description on the fields of the display link-aggregation interface command
Field
Local:
Remote:
Received LACP Packets: 0 packet(s), Illegal: 0
packet(s)
Sent LACP Packets: 0 packet(s)

lacp enable

Syntax
lacp enable
undo lacp enable
View
Ethernet port view
Parameter
None
Description
Use the lacp enable command to enable LACP.
Use the undo lacp enable command to disable LACP.
Example
# Enable LACP for Ethernet port Ethernet1/1/1.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] interface Ethernet1/1/1
[3Com-Ethernet1/1/1] lacp enable

lacp port-priority

Syntax
lacp port-priority port-priority-value
undo lacp port-priority
View
Ethernet port view
Parameter
port-priority-value: Port priority, in the range of 0 to 65,535. By default, it is
32,768.
Port-Priority: 32768, Oper key: 1, Flag:
0x00
System ID: 0x0, 0000-0000-0000
Port Number: 0, Port-Priority: 0, Oper-key:
0, Flag: 0x00
Ethernet Link Aggregation Configuration Commands
Description
Port priority, operation key, LACP state flag of
the local end
Device ID, port priority, operation key, LACP
state flag of the remote end
Received LACP packets
Sent LACP packets
155