Appendix B. Using The Rv50 Ethernet Port - Sierra Wireless AirLink RV50 Product Manual

Appendix B. Using the RV50
Ethernet port
The RV50 Ethernet port can be used to communicate with IP-enabled devices such as data-
loggers and IP cameras. However, the use of Ethernet communication increases the total system
current demand (the module and the device you are connecting to) by several milliamps as com-
pared to the use of serial communication.
The following example can be used to communicate with a CR1000 / NL121 via the RV50 Ethernet
port. Port forwarding in the RV50 must be enabled and specific ports need to be forwarded to
the CR1000 (in this case ports 80 and 6785). Additional ports can be configured as needed. The
host IP address 192.168.13.50 specified in the figure below is the IP address of the CR1000.
RV50 Sierra Wireless AirLink® 4G LTE Cellular Modem 34