Table of Contents
Advertisement
2: Getting Started
•
The AirCard 402
software
•
Account activation and
configuration
Document 2131145. Rev 1.0 May.09
Before you can begin using the modem, you must:
1.
Insert the modem, to install the enabling software and
drivers.
2.
Activate an account and configure the modem to use your
account (unless the modem has been pre‐activated).
This section provides an overview of this process.
The AirCard 402 software
The modem comes with the following software:
•
Watcher application that you use to manage the modem
and monitor your connections on your computer
•
The driver software that provides the interface between
the modem and your Windows operating system
Detailed instructions for installing the modem and its software
are provided in "Installation" on page 17.
Account activation and
configuration
To use the modem, you must have an account with a CDMA
service provider. The process of setting up an account is called
activation.
If you purchased the modem directly from a service provider,
you may already have an account; your modem may be pre‐
activated.
Otherwise, run the Watcher software and the Activation
Wizard, which guides you through the activation and configu‐
ration process. (Depending on your configuration, the
software and the activation procedure may start automati‐
cally.)
Configuring the modem involves setting the phone number
assigned by your service provider and may involve entering
other network parameters and settings such as a user name
and password to access services.
2
15
Advertisement
Table of Contents
