Set Gvrp; Clear Gvrp - Enterasys SecureStack C2 Configuration Manual

set gvrp

set gvrp
Use this command to enable or disable GVRP globally on the device or on one or more ports.
Syntax
set gvrp {enable | disable} [port-string]
Parameters
disable |
enable
port‐string
Defaults
If port‐string is not specified, GVRP will be disabled or enabled for all ports.
Mode
Switch command, read‐write.
Examples
This example shows how to enable GVRP globally on the device:
C2(su)->set gvrp enable
This example shows how to disable GVRP globally on the device:
C2(su)->set gvrp disable
This example shows how to enable GVRP on
C2(su)->set gvrp enable ge.1.3

clear gvrp

Use this command to clear GVRP status or on one or more ports.
Syntax
clear gvrp [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, GVRP status will be cleared for all ports.
Mode
Switch command, read‐write.
8-22 802.1Q VLAN Configuration
Disables or enables GVRP on the device.
(Optional) Disables or enables GVRP on specific port(s). For a detailed
description of possible port‐string values, refer to "Port String Syntax Used in
the CLI" on page 5‐2.
(Optional) Clears GVRP status on specific port(s). For a detailed description of
possible port‐string values, refer to "Port String Syntax Used in the CLI" on
page 5‐2.
.1.3:
ge