Show Pwa Banner; Set Pwa Banner - Enterasys SecureStack C2 Configuration Manual

show pwa banner

Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to enable port web authentication:
C2(su)->set pwa enable
show pwa banner
Use this command to display the port web authentication login banner string.
Syntax
show pwa banner
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display the PWA login banner:
C2(su)->show pwa banner
Welcome to Enterasys Networks

set pwa banner

Use this command to configure a string to be displayed as the PWA login banner.
Syntax
set pwa banner string
Parameters
string
Defaults
None.
18-60 Security Configuration
Specifies the PWA login banner.