Set Maclock Agefirstarrival - Enterasys SecureStack C2 Configuration Manual

set maclock agefirstarrival

Syntax
clear maclock firstarrival port-string
Parameters
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to reset MAC first arrivals on
C2(su)->clear maclock firstarrival ge.2.3
set maclock agefirstarrival
Use this command to enable or disable the aging of first arrival MAC addresses. When enabled,
first arrival MAC addresses that are aged out of the forwarding database will be removed from
the associated port MAC lock.
Syntax
set maclock agefirstarrival port-string {enable | disable}
Parameters
port‐string
enable | disable
Defaults
None.
Mode
Switch mode, read‐write.
Example
This example enables first arrival aging on port
C2(su)-> set maclock agefirstarrival ge.1.1 enable
18-54 Security Configuration
Specifies the port on which to reset the first arrival value. For a detailed
description of possible port‐string values, refer to "Port String Syntax Used
in the CLI" on page 5‐2.
Specifies the port(s) on which to enable or disable first arrival aging. For
a detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 5‐2.
Enable or disable first arrival aging. By default, first arrival aging is
disabled.
.2.3:
ge
.1.1.
ge