Clear Ip Address; Show Ip Protocol - Enterasys SecureStack C2 Configuration Manual

clear ip address

Mode
Switch command, read‐write.
Example
This example shows how to set the system IP address to
a default gateway of 10.1.0.1:
C2(su)->set ip address 10.1.10.1 mask 255.255.128.0 gateway 10.1.10.1
clear ip address
Use this command to clear the system IP address.
Syntax
clear ip address
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the system IP address:
C2(rw)->clear ip address

show ip protocol

Use this command to display the method used to acquire a network IP address for switch
management.
Syntax
show ip protocol
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
3-10 Basic Configuration
10.1.10.1 with a mask of 255.255.128.0 and