Enabling Or Disabling Gvrp (Global Setting); Displaying Basic Vlan Information; Figure 3-87. Displaying Bridge Extension Capabilities, Enabling Gvrp; Figure 3-88. Displaying Basic Vlan Information - Enterasys Matrix-V V2H124-24 Configuration Manual

Enabling or Disabling GVRP (Global Setting)

GARP VLAN Registration Protocol (GVRP) defines a way for switches to exchange
VLAN information in order to register VLAN members on ports across the network.
VLANs are dynamically configured based on join messages issued by host devices
and propagated throughout the network. GVRP must be enabled to permit automatic
VLAN registration, and to support VLANs which extend beyond the local switch.
(Default: Disabled)
Web – Click VLAN, 802.1Q VLAN, GVRP Status. Enable or disable GVRP, and click
Apply.

Figure 3-87. Displaying Bridge Extension Capabilities, Enabling GVRP

CLI – This example enables GVRP for the switch.
Console(config)#bridge-ext gvrp
Console(config)#

Displaying Basic VLAN Information

The VLAN Basic Information page displays basic information on the VLAN type
supported by the switch.
Field Attributes
• VLAN Version Number* – The VLAN version used by this switch as specified in
the IEEE 802.1Q standard.
• Maximum VLAN ID – Maximum VLAN ID recognized by this switch.
• Maximum Number of Supported VLANs – Maximum number of VLANs that can
be configured on this switch.
* Web only.
Web – Click VLAN, 802.1Q VLAN, VLAN Base Information.

Figure 3-88. Displaying Basic VLAN information

VLAN Configuration
4-207
3-147
3